Wheel bearing for 7-1/4 rear end?

[DalePSC]

I have a 64 Dart GT with 7-1/4 rear end, and I need to replace the noisy bearings. They are currently green bearings, but I would like to use the original tapered bearing setup. A couple of questions: 1) Can I convert directly back to tapered, or are changes made when converting to green bearings that complicate going back to tapered? 2) Can anyone tell me the tapered bearing part number for this rear end?

 

[66fs]

There are no tapered bearings for the 7 1/4 rear. Those are probably OEM. Those usually last 100K or 10 years.

 

[TrailBeast]

Just get your new ones and take it somewhere that has a press as the collar above the bearing is pressed on.
It can be done without the press, but man o man you better know what you are doing.

 

[SGBARRACUDA]

Yes and I just replaced one for a friend.Man are they proud of them. Was costly.

 

[DalePSC]

Thanks guys! Sgbarracuda, you don't happen to have a part number for that bearing, do you?

 

[SGBARRACUDA]

If you order from Rock Auto, this is the one you need.
More Information for CENTRIC 41164000
If you want to get it local a NAPA it is,
https://www.napaonline.com/napa/en/p/BRGRWF34R/BRGRWF34R_0226945125
They aren't bad, I was thinking about the differential bearing kit.

 

[DalePSC]

If you order from Rock Auto, this is the one you need.
More Information for CENTRIC 41164000
If you want to get it local a NAPA it is,
Wheel Bearing - Sealed Type - Rear Wheel
They aren't bad, I was thinking about the differential bearing kit.

Thanks for the numbers, that is a big help. Would you worry about the seals if they look to be in decent shape? Do you happen to have a source for these as well?

 

[SGBARRACUDA]

NAPA part is,
Wheel Seal - Rear Wheel
Centric number is 41763016
And yes I would replace the inner seal for sure, both if you have the other axle out.