Wheel Fitment Info 15x7" LBP

-

nerd racing

Well-Known Member
Joined
May 18, 2009
Messages
453
Reaction score
11
I was talking to a co worker who has a nice D150 with American Racing Vectors on it. He mentioned that he had another set of alloy wheels he was looking to sell that were for the truck. He brought them in and they are 15"x7" wide with between 4 and 5" backspacing (eyeballed it up with a measuring tape, closer to 5"). They are a large bolt pattern and fit the D150 (so 5 on 4.5" right?). How would these work on a 64 Barracuda with a LBP swap? The seem a little wide for the front but I was thinking of doing this car as a handling car (HemiDanny up front and Exploder 8.8 rear end narrowed to equal length shafts and a 4 link with coilovers).

I think they are OEM Ram wheels from a 1990 D150.

Pictured here:

http://www.wheelsandcaps.com/images/Product/large/19603.jpg
 
after about 1985 d150 bolt pattern changed -- so be sure it is still the 5 on 4 1/2 bolt circle.
on a 7" wheel offset needs to be approx 4.25"

Lawrence.
 
Thanks for the info, I knew my 81 D150 was the same pattern as the Ford RWD cars. Didn't realize they changed it between then and 93.
 
-
Back
Top