petreed150
Well-Known Member
Im getting ready to build a 318 bored 40 over and stroked to 392!Here is the specs!
1.Eagle 4.00in cast crank.
2.Eagle SIR rods.
3.KB forged dished pistons.
4.Eddy RPM 60779 heads with 63cc with stage1 port job and milled for 10.2 comp.
5.XE275HL cam with 231/237@50 and 525/525 lift on 110CL.
6.Comp 1.5 roller rockers.
7.AirGap intake port matched.
8.727 with 2500-2800 stall and 8.75 with 4.10 suregrip.This is going in 83 D150 2wd street/strip toy!Want to carb with mechanical secondary and no choke.Need carb and cfm recomendation!The choices that I've been looking at is Holley 750HP 80528,AED 750HP-HO,or Quickfuel Q-series.So which one is best?
1.Eagle 4.00in cast crank.
2.Eagle SIR rods.
3.KB forged dished pistons.
4.Eddy RPM 60779 heads with 63cc with stage1 port job and milled for 10.2 comp.
5.XE275HL cam with 231/237@50 and 525/525 lift on 110CL.
6.Comp 1.5 roller rockers.
7.AirGap intake port matched.
8.727 with 2500-2800 stall and 8.75 with 4.10 suregrip.This is going in 83 D150 2wd street/strip toy!Want to carb with mechanical secondary and no choke.Need carb and cfm recomendation!The choices that I've been looking at is Holley 750HP 80528,AED 750HP-HO,or Quickfuel Q-series.So which one is best?
