Which clutch fork?

[john.saylor]

1964 barracuda 360 833 with 10.5 bellhousing, what length fork and pivit should I use? I heard one from a b body would work, currently I have a 12.5 fork with a bend upwards and with a hole about 1 inch inboard for the adjuster. For now just knowing the fork length would be helpfull.
Thanks

 

[383 4 speed]

I had to cut a straight fork and add 1.5 inches and it works great lines up perfect

 

[grimreaper]

I used a 11-7/8 fork from a B-body and the pivot from the original 273. Had to modify the bracket for the pivot stud on the bellhousing but everything lined up nicely.

 

[john.saylor]

Thanks for your comment, are you using the stock zbar from the 273?
Thanks

 

[grimreaper]

I'm using an Early A z-bar. I had to cut a piece out of it and weld it back together so it would be short enough and line up with the clutch lever.

 

[383 4 speed]

I used a stock 340 z-bar and a ball stud from a ebody just pressed out the ball turned it around and welded it back together then bolted it to the bell added the inch.5 to the fork work great i also used a 10.5 bell