will it fit ? radiator 2949069 (abody year 1969 ?!) in early Barracuda 1965

[lilredridinghoo]

i´ve tried to search for the answer, but havn´t found a proper answer...

i´m just thnking of exchanging my modern aluminium radiator (which works good, but looks a bit like an alien in the engine bay) with an original Mopar radiator i just have seen pictures of a few days ago, and it would be available for a fair price ... but i´m not sure, whether it will really fit boltwise

the part number i have found reads 2949069 - so it should be from an 1969 V8 Abody i guess.

In- and outlet are located the same like my long gone orig early radiator (as far as i remember)

thanks for any hint you can give to me

 

[Plymouth 65]

Pre 70 should work as long as it has the drivers side lower hose outlet. 65'

 

[lilredridinghoo]

Pre 70 should work as long as it has the drivers side lower hose outlet. 65'

thanks - yes, it´s located on the driver side

 

[69FBCuda]

Does the width of the radiator match the hole as I believe 16" or 22" were available.

 

[lilredridinghoo]

just done some measurement on my fish radiator hole is approx 23" width (mounting holes somewhat 24 1/2")

the aluminium radiator i´m currently using shows a total hight of 21 1/4" and does not interfer with the hood.

guess i will give it a try