Will these bucket seats work as cores for 71 Demon?

[MyDadsADemon]

Looking to convert my 71 Demon from bench to bucket with the charcoal/black motif. Found these seats & they look to be the same cores as the Demon but not 100%. I'd recover of course & replace the tracks with (expensive) A-body tracks.

 

[ir3333]

if they are e body i think they may be bit too wide and a very tight fit

 

[YY1]

A, B and E are all the same.

'70 is slightly different on the top part, and the release button area. but will bolt in the same.

C is different.

 

[Mtrhead]

He's absolutely correct a b and e body seat frames are the exact same dimensions

 

[YY1]

...and the tracks should work, too.

E body is slightly lower then B, maybe an inch.

Not sure about A vs B or A vs E though.

...but the bottom line is that A, B, and E tracks should all bolt in and work.

 

[CFD244]

Pretty handy...........Already has an *** groove built in!

 

[Oldmanmopar]

They are the same as early 71 demon seat frames . Very hard to find with the metal hinge covers in place. Nice score

 

[MyDadsADemon]

Thanks everyone, ended up pulling the trigger, uship from IL to UT. Now I've got to figure out how to make it through a 33-week lead time on black/charcoal covers from Legendary...

 

[YY1]

Except for the miss-matched color on the outside of the seat bottoms.....those look ready to bolt in and sit on.

Heck, they even look soft to the touch.