will this setup fit under hood

-

1967formulaS

Well-Known Member
Joined
May 14, 2013
Messages
561
Reaction score
43
Location
Adelaide, South Australia
I'm looking at an edelbrock dual quad manifold setup complete with two edelbrock cards,fuel line, linkages and air cleaner.
Does anyone know if this will fit under the hood of my 67 barracuda 440.
 
I'm looking at an edelbrock dual quad manifold setup complete with two edelbrock cards,fuel line, linkages and air cleaner.
Does anyone know if this will fit under the hood of my 67 barracuda 440.

if it`s the edel. dual plane - old style, it just might, depending on your air filters. you could always configure some drop base air cleaners. I had to do that to keep my "highly reworked" torque 2 under a six pack scoop!
 
A standard six pack with RB air cleaner does.
Lean on the side of caution. Don't poke the studs into the hood.
A lot cheaper than hood repair..............
Remove air cleaner stud.
Lay a piece of plywood across the carb.
Add a couple columns of modeling clay with wax paper on the tops.
Close the hood slowly and completely.
Open the hood and measure the crushed clay to get an idea of clearance available.
 
-
Back
Top