WINDOW ALIGNMENT - '66 BARRACUDA

-
GONEFISHIN'

GONEFISHIN'

Well-Known Member
Joined
Jul 6, 2014
Messages
510
Reaction score
332
Location
London, Ontario, Canada
Looking for ideas - we've got the door and quarter windows as closely aligned as we can get them - there's just no adjustment room left. The leading edge of the quarter window is just barely under and touching the trailing edge seal on the door window. Anybody have any ideas about adding some material to the edge of the quarter window to make it just a bit more water/wind resistant?
 
If this is the issue I had. Then the gap is like the 1/4 window is not tilted in enough and there is a gap between the stainless strip and the 1/4 glass. I had to make adjustment to a screw that gave the window more draw inward. It’s been awhile. So forgive me if I’m wrong. But there was an adjustment that did not look like it would work but it did. Opposite what you would think it would do. It took a while but I got it. Let me look for a few pictures.
Syleng1
 
Assisted my friend with his 65
Mopar action Aug 2010

44AA7FA0-7296-4D93-818D-E505CFC83C96.jpeg
 
Nope, they only covered the rear quarter window. It was in the Tech section.
Do a search on here, there should be a few threads, I think there's a link to a video in one of them.
 
You must log in or register to reply here.
-

Back
Top