[WANTED] WTB 15 Inch x 12 wide Wheels with 2 1/2 BS

[GTX JOHN]

Looking for racing wheels for my Sons SS/KA Duster.
15 x 12 with 2 1/2 Back Spacing although 3 or 3 1/2
might work. Brand not important although must be lightweight
racing rims.

 

[Oldmanmopar]

That's a tough one John. Weld Draglites or Cragar Supper tricks with dual bolt pattern would be an easier find. More GM's run that offset. Did you try Racing junk .com ?

 

[33IMP]

I had some custom tt2's built, 15x12, but the minimum bs I could get was
3 1/2..

 

[GTX JOHN]

I can buy a pair of Welds with the dimensions that
we want to try on Summit for about $1,100.00 for the
pair. That just a lot to try an experiment that may well not
work. We try to test with 10.5 x 30 Radials at a Division race but
they said the wheels were too far inside the body and the
National Teck Director stop up from try them with the 10.5
radials. The Duster is very heavy at 3400+ weight for our
class and with the Trans brake and Ladder bars may just
not work with that combo. My SS/MA 318 aspen runs the
10.5 at a similar weight but it is a high 10 car on a foot brake
and barely runs 1.4 / 60ft not 1.3 / 60ft.

 

[GTX JOHN]

Still look!

A dual pattern is fine but one pattern needs
to be 4 1/2 inches Bolt Circle.

Will to pay a good price. Not trying to get
a deal.