yes another backspacing thread help....

-

BYM

Active Member
Joined
Nov 9, 2018
Messages
33
Reaction score
44
Location
Guatemala
hey for a 1968 valiant, 4 door slant
I am probably gonna have to do a custom wheel setup for the bugget on the rust bucket.
importing steelies from the US to Guatemala city is more expensive than buying the wheels with tires on them.
so this is probably the best cheap way to get off the small 13 inch wheels and tires
found some 15x6 steel wheels in my shop.
gonna cut them up and re weld back with the right backspacing.
now the magical question which a lot of answeres have been told:
for the front im looking into 215/65R15 and rears 225/60R15 both on 15x6 wheels.
any suggestions or photos of this kind of size with pictures?
 
do the 15x6 have the correct bolt pattern? what backspace do they have now? my guess is centered , around 3.5" - 4.0"
 
do the 15x6 have the correct bolt pattern? what backspace do they have now? my guess is centered , around 3.5" - 4.0"
well 5x100... I will re drill..
measured the front and seems I would have a nice clearance up front with a 3.5"
rear it seems I could go with a 2.5"
kinda giving that fake staggered look.
 
-
Back
Top