Z-bar bushing source?

[sargentrs]

The plastic bushings that go on each end of the Z-bar rod. The retaining ridge on mine has worn down so now the bushing slides out of the bracket and down the rod occasionally. Makes PARK more of a "suggestion" than a "command".#-o Anybody know where I can find any? Thanks to all for any help!

 

[Inertia]

http://nationalmoparts.com/parts-ca...geV1_WIDE.tpl&product_id=1809&category_id=357

http://www.dantesparts.com/zbar.html

cheers

 

[sargentrs]

http://nationalmoparts.com/parts-ca...geV1_WIDE.tpl&product_id=1809&category_id=357

http://www.dantesparts.com/zbar.html

cheers

Thanks for the links but I believe those are for manual transmission with ball studs. Mine's an automatic. It's just a round nylon shoulder bushing that snaps over the rod and through the hole in the transmission bracket.

 

[Inertia]

Well then,, try this ,, bottom of the page..

http://www.partsmix.com/transmission/

hope it helps

 

[zkx14]

This?
http://www.ebay.com/itm/Dodge-904-T...r_Truck_Parts_Accessories&hash=item3a7466af14
Or this?
http://www.ebay.com/itm/Mopar-A727-...Parts_Accessories&hash=item339b278877&vxp=mtr

 

[sargentrs]

This?
http://www.ebay.com/itm/Dodge-904-T...r_Truck_Parts_Accessories&hash=item3a7466af14
Or this?
http://www.ebay.com/itm/Mopar-A727-...Parts_Accessories&hash=item339b278877&vxp=mtr

Bingo! That's it. Thanks a ton zkx14!

 

[sargentrs]

Well then,, try this

http://www.partsmix.com/transmission/

hope it helps

Couldn't be for sure from that pic in your link but after seeing zkx14's pics I think yours is right too. Thanks!