Zb Bell housing bracket

[omotz]

I’m thinking the picture shows it going in the correct orientation…..correct me if I’m wrong. As always, thanks in advance.

 

[junkyardhero]

yes. but your Z bar is 180* from where it should be

 

[omotz]

Thanks for the reply. I knew that it’s interfering with the exhaust. That’s why I had it flipped upside down.

 

[CRUZE 418]

There are a couple different brackets depending on bellhousing year. '72 and up was different?

 

[Uncle Bob]

I've always found that when you have a slotted hole like that the slot will face downward.