Search results for query: *

I have a Hemi Denny front end in my 68 Cuda, and love it! What do you guys use for front end alignment specs. I don't do any road racing just normal street driving. Also it is power steering.....

On my 68 cuda, I have a 588 rb motor in it. No way it will fit under the stock hood. I see you can get a fiberglass one with a super stock scoop. They have 2 sizes of scoop. One is 5" tall and the other is 4". My motor has an indy 3x with a dominator. Does anybody run a similar combo? Need to...

This is for my 68 Cuda Fastback. On my 4 speed console, I am missing the cover that goes over the shifter, on the side of the console. Does anybody know where I can get one of these?

Trying to get my mechanical clutch linkage working right. It's a big block in my 68 Barracuda. Bought all new linkage from Brewers for the application. You can see the angle of the clutch Fork push rod is at a steep angle and not level. When I push in the clutch it wants to push the fork up and...

Well I have mine installed now. Everything fits great. Everything lines up and nothing rubs. I got mine for the added Clearance to put a RB big block into my 68 Cuda. I have a ton of room for some big custom headers now! The motor is 950 horsepower 860 foot pounds of torque. 588". Also has a...

Putting my Rb motor in my 68 Cuda. It has a QuickTime bellhousing. As you can see in the picture the bracket for the z bar hits the body. Motor still needs to go back a little more. Anybody else run into this? I don't want to just smash it in with a hammer. Thinking about cutting an access hole...

588 cubic inches. 950 horsepower 860 foot pounds of torque, and a passon 5 speed Overdrive. All of this is going in my 68 Cuda Fastback. Streetcar, should be a badass ride!

Getting ready to install my 588" RB in my 68 cuda. It has Indy 572-13 heads. It also has a Hemi Denny coil over front end. It will also have a motor plate. Do not want fenderwell or partial fenderwells. Would TTI headers be my best choice? Looking for the most room to work on the car. Since I...

I have broke 3 transmissions in 2 years. They are 18 spline 833 4speeds. It is always the 3rd gear, on the countershaft. It usually does not hurt the 3rd drive gear. This last time it did thou. They are all in street cars, making about 720 hp/660 tq. I don't speed shift, or have sticky tires. It...

I am having Todd at Marsh Performance build my motor for me. after reading about the motor he built for moparts member Tig, I knew I wanted him to build mine. It specs: 588 ci indy aluminum block indy 572-13 heads 410-420 cfm diamond gas port pistons 4.5" bore 13.5-1 cr callies 4.625...

I am ready to pull the trigger on a front end for my 68 cuda. trying to decide which would be best for me. I am looking for a power steering set up. street car. questions: which is lighter how long will it take to get which gives the most room I thought I saw that the hemi denny has the...

I need for a 68 cuda with bucket seats, 2 ea. seat hinge bolt. also the metal strap that holds the wire, under the seat bottom. it hooks to the front hook, the other end goes on the wire.

WTB seat hinge covers for my 68 cuda, with bucket seats. would prefer maroon, but any color will do. I will dye them. no damage.

I bought some carpet and binding to make my own carpet, for my console. nobody makes it. question is, is it one piece or multiple pieces? it would seem that it would need to be in pieces. does anybody have a pic of a stock 4 speed console? trying to get it to look as stock as possible.....

i need only the pass side pilar stainless. it needs to not have any bends or dings. its for a 1968 cuda. thanks

here is a list of parts that i need for my 68 cuda fastback: 1 dvr side pilar trim, any color. 2 pass side, rear door jam seal. the one that bolts to the body... 3 ash tray bearings 4 kick panels, any color. 5 top left metal trim, viewed from the rear, that goes on the fold down board. ( in...

i bought a new maroon carpet set for my 68 fastback. it did not come with the carpet, that glues to the 4 speed console. i thought it was a complete set. anybody know where to get maroon 4 speed console carpet?

i have a 68 FB cuda that i put a new headliner in. when i bought the car, the liner was already gone. question is, what do you do with the end of the liner, front and rear? does it go under the glass gasket? i dont see any holes for any kind of trim. i've done a bunch of charger liners, and...

i see laysons makes theese for 68 cudas. they are made out of stainless instead of aluminum. they are expensive. has anybody seen these on a car. how do they fit and look? i'm getting close to needing mine. they need to be repaired. i would likely spend what the re-po,s cost. just wondering...

im restoring my 68 cuda. i bought the year one (preminum) window weather strip. they fn suck. i cant even roll the window up or down. when i try to roll it down, the outer striping folds over, instead of just laying against the glass. the inner fit great. is there a better kit for these cars? is...

is the automatic console the same as the 4 speed one? if not whats the difference, and can you convert a auto one to work? i know the top plates are different. i'm talking about the lower plastic part.

I am starting a thread about the restoration of my cuda. It is a numbers matching, 1968 formula S fastback. it is a 383 with a four speed. The color is burgandy poly on the outside, and maroon on the inside. My plan is to put a 572-605 big block in it. it will be an aluminum block as I am...

I am getting ready to paint my 68 Formula S fastback. It is a big block 4 speed car. The stock radiator that came in these cars are so tiny I don't know how they never overheated. I will be building a 572" motor for this car and I want to put in an at least 26" radiator. Does someone make a...

my 68 formuls S fastback is getting painted very soon. it is a big block 4 speed car. the stock radiator is tiny. i will be building a 572 motor for it. do they make a converson panel to put a 26" radiator in? what else can i do before i paint it? it really needs a bigger radiator.....

i have a line on 2 68 barracuda convertibles. one is rough, one is ok. both are 318 cars. they are pretty much complete. neither one runs. the one that is ok could maybe be made to run. it also has factory ac. what are they worth? i was thinking around $ 2500-$ 3000........

i need the 4 ball bearings for my ashtray. it is a 68 cuda.

i'm restoring my cudas rallye dash. can someone tell me which way is up for the wiper swich? i see it can go both ways. also, what do you use to hold the wiper and headlight knobs on. thanks

i'm restoring my steering column on my 68 cuda. i have dissasembled everthing for blasting and paint. i cant seem to be able to get the turn signal switch wires to come out of the plug. is that how you get the wires thru the column trim? or, do you dissasemble from the switch end?

i have a 68 forumla s fastback. when i took the interior out, the rear side panels were not carpeted. i bought a new carpet set from year one and it has what apears to be carpet for the rear sides. would this be correct for my car? the side panels now have a texture like paint or maybe even...

i need a new bezel and new lense for my 68 cuda dash. i was going to buy from be&a. is there a dealer that has better priceing? also has anybody bought theese? can i get some feedback on the quality?