Search results for query: *

I'm looking for used, black kick panels for a 1970 Cuda, preferably passenger side but will accept both sides for sale.

Hi, Do you have any 340 forged cranks now? Tom Oliver

Any 340 forged cranks, 3.31 cranks available still.

Desire purchase of an OEM, aluminum, 340 six pack manifold, part numbers 3418682 or 3418681 on the aluminum casting. Manifold flanges must be untouched.

I want to purchase a 340 block, standard bore, with crank. Is it $350? I'll even come and get it, Buffalo, NY to Pittsburgh? Forged crank, right? How are the journals?

I'm looking at a Plymouth service manual, valiant. I believe he will read voltage with red VM lead , 12V+, at position J at the bulkhead connector if the link is good, and black lead is attached at starter relay circuit ground. If no voltage between position J and the ground terminal then the...

340 SS Valve Springs. Never been on a set of heads. Two sets. 200#@ 1.845. 555#@1.290. Springs are very likely all Speed Pro but could be Chrysler too. $100 as is. Pictures next week.

Are you willing to sell the block separately?

Fellows, please read, see what you think, and comment on this. I am looking at the 1970 Plymouth service manual for the 340. Think first in terms of the stock setup. From the positive side of the battery you have heavy wire going to the starter and a lighter wire going to the starting relay...

I believe the rulebook states (General Regulations, page 32) that the battery box must be sealed and has to be vented outside the body, probably reduced risk of hydrogen gas. You can confirm by reading the rule book.

Hi fellow members, Thanks for your info and support. I have contacted Factory Mopar Parts.com, no inventory on requested cam. Also have contacted Comp Cams. This is the route I prefer since the Cam Dynamics cam profile is probably long time obsolete. I have given them the cam specs...

Is Harold Brookshire part of this forum or do I need his email or phone number to contact him? Tom

I would like to puchase a new or used "Cheater" cam with cam card for a 1970 340 car in Stock Eliminator. Advertised specs are .462/.473 lift, 336/348 duration, overlap 118, centerline 108. The cam was made by Cam Dynamics under the following Direct Connection part numbers:P4007275 or P4349243...

Dam. Nice 69 Barracuda. My theme song is "Barracuda" by the rock group Heart.

Thank you. Go six Pack.

What page did you find that on? I want to read it again. Thanks.

Thank You, sir.

I would like a nice Dodge Ramcharger AM/FM radio to start. Also some decent rear quarter panels. I have 1990 360 Ramcharger for towing. Inside and outside is decent except for the quarter panels.

Thank you, I will check it out. I would like a nice Dodge Ramcharger AM/FM radio to start. Also some decent rear quarter panels. I have 1990 360 Ramcharger for towing. Inside and outside is decent except for the quarter panels.

Hi Fellow Members, I been studying Mopar literature of various sources and am getting conflicting 340 C.I., technical information. I want to know (1) what is the correct factory block deck height for a 1970, 340 c.i. motor, 9.94", 9.85", (2) piston deck height with the stock, factory cast...

Hi Fellow Members, Within the USA, do any of you know any dealer who sells working Ramcharger Survivors and/or salvage yards that have Ramcharger parts for sale? Please advise? Tom

Hi Evildart, Yes, the color is outstanding. You know what's so nice about yellow, the contrast is great with black interior, black tires and lot's of chrome. They all complement each other. Let me know how you make out on the dyno with the Holley carbs. I would think that since these...

HI 67cuda roland, You've been given a lot of good information. I agree with another member that you should start with the rear suspension first. Steady improvement requires a lot of discipline. Change one area at a time or you will get lost. Get the rear suspension running right first...

I never use another carb over a Holley. Also, don't the TQ center sections tend to melt?

Hi Evildart, Love your six pack package. I'm a 340 six packer myself. Couple of things. The original six pack carb's from Mopar in 1970 had an idle circuit which ran lean, making the motor very difficult to start, even for street applications. I have no idea whether the current carbs...

Hi there, Well one thing is for sure. The car is squatting which in effect pulls the tires up off the payment causing tire slippage throughout your run. I assume your springs are multileaf, stock or super stock? The rear leaf springs should cause the rear of the car to rise not squat. The...

Hi Cosgig, I recommend you go to your nearest Chrysler dealer and purchase the Mopar Engine Modification handbook. It will answer a lot of your questions and satisfy for yourself what is right. Later on, consider one for chassis performance book too. During your teardown of the 340 cast...

Hi 440outlawdart, I really find it difficult to believe that your peak rpm is so high. A fellow member recommended 5700-5800 RPM and I agree. I believe this should be your tarket for both shift points and running through the traps. A Hemi car has always been designed to sustain high rpm...

Well fellows, I don't like any of the Bush brothers, even if they are running Mopar. They'd be more popular and respected if they made beer. I gave up on Nascar years ago (really the Jimmy Johnson Race series). If you really want to enjoy great racing, watch or go to ASCS Races in your...

Ok, thanks. Tom