I have a 72 Swinger with the Board headliner and I am missing one black rubber coat hook. It is the type that slips over the white plastic support piece. Does any one know where to get this?
Thanks,
I just bought from Summit the Pypes Violator Exhaust for my car. Does any one out there have this exhaust and how did it go on? And was it professional installed and welded? I have a stock 340 manifold with down pipes so I hope it matches to those. Any info will help.
Thanks,
I want to re paint my 72 Dart Swinger tail lights. What paint is used for the black and the silver and has anyone done this job before? Its going to be a fun tape job in those small areas.
Thanks,
In my 72 Swinger there is a absurd amount of seam sealer everywhere in the trunk. My rear window leaked at some point and rusted some areas in the trunk. I am now removing the seam sealer to insure all the rust is gone. My question is do i need to put all of this back on. The had seam sealer...
I am redoing my interior on my 72 Dart Swinger. I just got in the carpet i ordered from Classic Industries and I am not impressed. Is there a molded carpet set that any one sells?
What is the best carpet out there?
Thanks,
I would like to reinstall a factory radio, unfortunately my dash has been cut to accept a single din. Is there a fix for this? I can do the metal work but the black trim piece that extends around the radio would need to be replaced. Is this piece available?
Thanks,
I have a 1972 dart swinger with a 318. I added A/C and an electric fan and my stock alternator is not keeping up. I see a lot of choices out there: round back, square back , one wire connection etc. What do I need in size and style?
Thanks.
I have a 72 Dart Swinger exterior is light green metallic and interior is the darker green. I'm doing the interior and want to repaint the interior pieces. What paint code are these colors?
Thanks
I'm purchasing a Classic Auto Air set up for my 72 Dart that has a 318. I have a stock radiator that has been cleaned and stock fan with no shroud. What type of cooling changes do I need to make with the A/C installation. And any tips on installing the A/C would be greatly appreciated.
Thanks,
Looking to pep up my stock 318. I currently have an edelbrock 600cfm carb and edelbrock intake with 340 exhaust manifold and getting TTI exhaust. I want to add a cam to pep up the engine and add to the sound. What do I need To do this. If any one has a good combo with part numbers that would...
I have aquired the vinyl top trim and hardware, but have a few questions. I am not going to put a vinyl top on since I plan a resto in the future and don't want to waste the money. I am going to plasti dip the top flat black. What is the best way to install the trim? My car was origonally a...
Worked my car into our engagement photo shoot. Then for the wedding I was given a huge framed photo that she said can even go in the living room. Great Wife
I have a new Edelbrock 1406. Two pumps and starts right up. The problem is when I shut down and try to start up right after or later in the day. I do not give any gas, but have to turn over a couple of times to start. Any info will help. Embarrassing trying to leave and your car does not...
I have a 72 Swinger and I think I have all the spare tire parts. I however do not know exactly what goes where. Does any one have a pic of how the spare tire and jack is set up in the trunk.
Thanks,
I have a 727, with a 318, Edelbrock Performer Intake and Carb. At what speeds should the tranny shift to second and third. Right now it shifts to 2nd at 20 mph, and 3rd at around 50mph. But if I let off the gas while accelerating at 40 it shifts to 3rd. If I dont let off at 40 it shifts at 50...
I need the rear deck Lid? The area behind the back seat where the speakers go for my 72 Swinger. Who sells the best ones and what is it's proper name.
Thanks,
Just changed the stock valve covers for new Mopar Cast Covers. Found out that the top rear bolt hole is messed up pretty bad and can not be fixed with out pulling the head and having a machine shop rethread it. The old cover did not leak, but was RTV'd like crazy. I used the black gasket that...
I am installing an Edelbrock Performer Intake on My 72 Dart that has a stock 318. I put on intake and on both sides in the middle the upside u shaped ports are partially visible. Edelbrock tech said this is ok , that these port are not used and actually are dead ended. Is this correct? Any...
I have a 72 Swinger, seems to be SBP. I want to get new center caps and trims rings, what ones do I need. I have a different set of centers that came with the car but they do not fit. Can I switch to the acorn center caps? Where is the best place to get these for the price and quality?
Thanks,
Ok, I was changing out a bad lifter on my 318, and on the last bolt for the rocker arm, it broke. Got the proper easy out and it broke also. I have the head off and need to bring it to the machine shop to get fixed. Question is should I just get this problem fixed or since I am so far in get...
I have a 72 Dart Swinger Light Green Metallic. I am going to get a repaint and want to do the center hood stripe with dual scoops and the rear tail stripe. Does any one have the dimensions for the black out area. Also any info on the factory paint code to a new modern paint code.
Thanks
When I bought my 72 Dart it came with seat belts for the front lap belt not installed. I went down to hardware store got two grade 8 bolts that fit the body nuts. Passenger side worked fine, so wifey is safe, but drive won't line up. I beleive this is suppose to be a star head bolt which would...
Looking to get a new set of valve covers. My question is the stock ones I have on have a pcv on one and a vent hooked up to the bottom of the air cleaner on the other. The Mopar Performance ones only has oil caps on both. Can I dis regard the pcv and vent to air cleaner or do I need to add...
I just aquired a Edelbrock 1405 600 cfm carb and purchased an Performer Intake. Is there anything special I need to do to get this up and running, first time doing this type of mod. The carb came off a running 69 Bronco. Any tips will help. Thanks.
Ok, Probably a easy task but I need help. Bought a new PS Pump has a smooth shaft with the end threaded out. My old pump has a threaded part in the pulley. What is the easiest way to get it off. I put a bolt in pulley and tried to thread it in to see if it would push it off while holding the...