Search results for query: *

Hi everybody: Im looking for a place to order a custom solid roller cam for my stroker, already call Howards but the estimated time for delivery is 16 weeks!! Also write to Comp and Hughes but havent an answer yet. Any recommendation on somebody? Don't want to wait 4 months for a cam. Need...

Does somebody have experience with this vb? How good it is?

Hi: Decide that im gonna put a transbrake in my car, just need to know what are the options, is for a stroked small block, around 500 hp, 500 tq, 4.56 geared 9",28.5 slicks, 4 link suspension; already using a 3800 converter and a B&M Z-Gate shifter (knowing maybe have to change both). The car...

Hi: Looking for a powerglide bellhousing for a small block mopar, like this one;

Hi: Does somebody knows if is possible to get an adapter plate to put a powerglide on a small block mopar, im looking just for the plate that goes bolted to the block

Hi: Does somebody knows if is possible to get an adapter plate to put a powerglide on a small block mopar, im looking just for the plate that goes bolted to the block

Hi: Im in the process to rebuild my tf904 trans, trying to do it the rigth way but need a lot of advice because dont know a lot on transmissions stuff; so gonna put the engine and car specs and hope to get your help. 74 Plymouth Duster around 3350 pounds 414" small block with ported Edelbrock...

Hi: im gonna buy a set of drag front tires for my 74 Plymouth Duster, already using 155/80 r15 (24.5"), but need to go taller to get a good match for the 28.5X10.5 slicks in the rear, what you think is better: 26 or 27. Pictures will help a lot, thanks.

Hi: Im in the market for a new carb, just need some advice on the size, it's for a small block stroked to 414", all forged,.Bighmouth Eddy heads by Hughes, 254-264, 640-662 lift mechanical solid cam, Indy single plane intake, 1 7/8 headers, 10.6-1 compression. Tf 904, 4.56 with 28.5 tires, 4...

Hi: Looking for a set of forged pistons for a stroker sbm: 4.060 bore, 6 to 8 cc dome; just find the Wiseco K0011B6, and trying to see other options. Thanks.

Hi: Im gonna try to rise the compression ratio in my engine, the calculators say is 10.84 right now: 4.060X4.00, 73cc chamber, +5 cc piston, 0 deck, .039 gasket. It suposse to need 60 cc chamber to get to 12.57, so the question is: how much milling you think is needed? On thousands. Thanks

Hi: I'm just finished the rebuild on my stroker small block, but in the first passes, after proper break in, when I rev up it blows a lot of air and oil thru the valve cover breathers ( real mess) ; Obviously something's wrong, Everything was new, my builder says he cut the first ring to...

Hello: The new setup is almost ready, what's your guess? Has the following combo: 360 .060 over 4" Eagle forged crank Scat I-beam rods Flatt top forged pistons 0 deck Hughes Engines Bigmouth Edelbrock heads ( 225 int. ports, flow 316@650 lift ) Indy single plane intake 850 Ultra HP carb...

The new engine for the Duster os almost ready, here some images:

Hi: Looking for a carb for my stroked small block, mech solid cam, single plane intake , and finally get to this 2 options: Holley Ultra XP 950 80805BKX or Quickfuel Race-Q series RQ-950 (with the option to be annular or downleg) Any advice? Thanks in advance.

Hi: Im trying to put a powerglide trans in my small block Duster, and need to know what is needed to make the swap easier. Any help?

Hi: Today i receive 4 big boxes from Huges engines with a lot of new stuff: 60779 Big Mouth heads (225 int port ) Indy single plane intake Solid flat tappet cam 254/264@050, 640-656 lift, 112 ls (Planning 150-200 hp shot of nitrous ) 1 7/8 headers from TTI ARP main and head studs...

Hi: Looking for a place to buy a M302 kevko oil pan, already call directly to kevko and they say is out of stock, not to be available until 2 or 3 weeks; call to almost all the distributors they have and nobody have it!!! Does anybody knows where can i buy one?!

Hi: have a 74 Plymouth Duster around 3300 lbs, 415" sbm, 12.5-1, 250@050 flat tappet cam, single plane intake, 850 Ultra HP, Tf 904, 3800 stall converter, 4.56 geared 9", 28.5X10.5 slicks, 4 link suspension. Already running 11.40 on footbrake with 1.58 60fts. (The track is at 4700 fts over sea...

Hi: Looks like Airwolf heads are hard to get by the moment, somebody have any idea of any other options with similar specs? Thanks in advance

Hi: Im refreshing my sbm and planning on upgrade the top end, so gonna change the Eddy heads and Airgap for a set of Airwolfs (or something very similar) and Super Victor. Its an all forged bottom, flat top pistons, 12-1, 850 Holley Ultra Hp, 1 7/8 headers, 3800 converter (prob needs more...

Hi: Looking for 1 7/8 headers for my small block 74 Duster with Eddy heads, preferably TTI's, new or used

Hi everybody: I think my combo is missing something because is slower than i may suposse, the most notorious at the big end, here's the list: 360 stroked to 416 4.060x 4.00 Flat top Icon pistons Eddy ported heads and RPM Airgap Holley Ultra HP 850 Custom Comp Cams mech flat tappet...

Hi: Need a set of custom pushrods for my sbm stroker with this specs: 5/16 Chromoly 7.250 in. total length Cup top tip style Any advice on a good place to build them as fast as possible

Hi: Just have my new cam: Comp cams mech flat tappet 251/259@050 573/597 lift 106 lobe sep. Its for a sbm 360 stroked to 416 Ported Edelbrock RPM cylinder heads 12.5:1 Comp. Crane 1.6 rocker arms Holley Ultra 850HP TF 904, trans pack, 4.56 geared 9 inch rearend Custom Edge Racing converter...

Hi: Ready to order a 712712-08 Howards mechanical flat tappet cam (254/260@050, .599/616 lift, 108 lobe separation) but cant find info about what springs, retainers and locks to use with it on some Edelbrock Performer Rpm heads for LA small block with Proform 1.5 shaft mounted roller rockers...

Hi: Have this combo on a 74 Plymouth Duster Stroked 360- 4.060X4.00 Forged rotaring assembly with Icon 744 flat top pistons 12:1 Ported Eddy heads and Airgap Holley Ultra HP 850 242/248@050, 549-546 lift hyd roller cam 1.5 shaft mounted roller rockers Tf 904, TCI 3000 rpms...

Hi everybody : Looking for a good place to order a custom solid flat cam for my stroked sbm, will apretiate any advice, thanks.

Hi: im having problems with my holley blue pump (the pressure drops constantly) and trying to upgrade to a better pump if possible, what's your recomendations? Its for a stroked sbm, 12:1 comp., eddy heads, airgap, ultra hp 850, hyd roller, around 500 hps. Will apretiate any advice

Hi : im looking for a 904 torque converter around 4000 stall