Search results for query: *

The rust stopper product is called "Rust Encapsulater". I've heard great things about it, but have not ever used it. As far as removing all the loose rust, go get you some cheap Harbor Freight wire wheels for a drill. They work well for the price, but I would highly recommend a top quality (3M...

The taillight opening is what I call it. It can be drilled off from the outside, as it is an easier job to re-install the new panel. There are not any reproduction pieces that I am aware of, so the only option is used. Try to contact member Lee Robinson out of California, I believe he still has...

3m string caulk. Never gets hard and keeps dirt water out.

Yes AMD does, I have nice used one all drilled off.

Took it out of my Brain, blue masking tape on everything that may contact anything and than some!!!

Sedanman is correct on everything he has mentioned for the rear window. 2dr post cars have a Valiant style rear glass in them. Nice job Sedanman!!

I agree with fishmens67 post.... as far as I can see, the rocker looks to be fine in the picture, it's the fender that is basically junk, not even close to being correct, and what does a fender like this cost? AMD just isn't getting these panels right. Can't understand this with all the...

X2 for me.... it is some of the best out there, we have all there rubber parts on all of our old car's. One of the old cars, their rubber parts have been on that car for about 50 years, and still look's great today!!

I will say this.... I have read just about every post, you have written/or posted to, and just about everytime I have read your stuff, and I have agreed to about 99% accuracy. What I was trying to say/mention is, the hole stamping's in which you measure to/from or front/rear of those/them holes...

This is just a FYI.... alway's take in consideration, that these factory measurement dimension's should only be used, when you are using OEM used frame/body metal, as a lot of the aftermarket framerails/etc. and unibody support metal, do not have the locating hole's in the proper location, which...

There is an article (post) that was written by member (Cosgig) about how he had excellent luck using a single piece of harwood flooring and he also mentioned you can get a free example of it from Home Depot, if you do not have any other access to get one. He has pic's posted in that post of how...

We have a few nice used one's.... and the 72 Duster roof even has the front A-pillar's complete down to the front cowl, if anyone should need or want the roof w/A-pillar's.

We like the HF spring loaded type, the double sided cutter is good and works well, and you will rarely break the cutter, unless you get it in a very serious bind. The only thing I don't really like is the hex size, which is 7mm, but we have a few custom made extensions, for getting down in the...

X2.... back in the day when Lynn Steele (himself) was producing every piece of rubber themselves, there rubber was totally correct and exact!! I'm not totally sure anymore they make everything they sell, but I'm sure they can tell you via a phone call. The Steele Rubber on my 38 Plymouth Coupe...

What was said above is true........ and they do have the lower quarter panel section available through AMD, Auto Body Specialtys, should have them. If you would need or want some very clean 4 dr doors, we have some. Just PM us if you may be interested.

Try searching this cowl drain problem here on this site, as I wrote some excellent information on this, and how to help cure the problems your having.

I forgot to mention one thing..... do grind down the weld and the surrounding area with at least a 24 grit grinding pad for exceptional adhesion to the trunk floor. We also have the best luck sanding with 3M 40 grit sandpaper to get down to where you need be. Good Luck!

Well......... in our honest opinion, you will be just fine with the Evercoat Metal 2 Metal (we have never used the Evercoat brand) we have always used the USC all-metal with great success. Start with the Evercoat M 2 M over the welded seam area, just make sure you will have sometime after it is...

We like the Meguires brand products.... but there are other very reputable products out there like 3M, Eagle, California brand products, etc. I also like to use Kit-J wax (it is a paste wax) on the windows inside and out, and if done real nice, cannot even tell there is even a glass there. You...

As for the doors..... I believe the 67-69 doors will fit, but I think the door push lock buttons are in a different location than the stock 69 doors location. The 70-74 doors will bolt up, but something is different but not sure what it is. The door hinges are the same for all those years. I...

We are 2 hours east of Chicago. We will give you a good job. 60 years of experience,me and my brother. Pm if interested.

As long as you are moving forward that is good.

Take a 3m 3 inch 3/16 or 1/4 grinding wheel and go down thru there carefully and grind the roof skin down carefully the metal will turn blue when it gets thin. It not hard just take your time and be careful not to grind into the drip rail.you can drill off the drip edge but it is extra work and...

You can install the AMD floorpan in your car, without removing the taillight panel, but I personally like to remove the original tail panel, only for the ease of not having to work over top of it. Plus you have to drill all of the spot welds at the lower back bottom area (90 degree edge ) of...

I agree with Treblig 100 percent.......... he is spot on, as ALL reproduction sheet metal is made to be modified one way or the other IMO. This is the proper way to get it done. Good luck with your project! Dodge33

I can do the headlight buckets. Don't want to step on anyone's toe's. Thanks

How soon? We do this work. What kind of paint is on the body? Pm us

Black 3M string caulk

What kind of paint are you using? It is way to way to hot and humid to try and paint.wait until it cools down.your just like me try and get stuff done and the weather is never right!