Search results for query: *

My PST torsion bars finally arrived...see photo...they do have a left and a right, but come with no instructions. I probably won't be able to try installing them until next week. They don't appear to have any offset either. I will post back when the 'fun" begins...were you able to contact the...

The pitman arm is for 67-72 a body which is supposed to be the correct one for that after market steering box...Moog crossover number K7074...direct bolt in

Greetings once again, Purchased the flaming river 16:1 manual box and have it bolted to the K-member of my 71 Demon. I have tried installing a new DLZ brand p/n K7074 pitman arm but it is too tight and will not go on far enough...aprx 3/8 inch short of being flush...super tight to wrench...

Sireland67, still waiting for the PST bars to arrive...even though they are from a different manufacturer they should be nearly identical, as the diameter is the same....right now my LCA's are just sitting in the k-member loose and not tightened, this allows them to be at nearly the 6 o'clock...

I have a set of PST 1.030 torsion bars arriving for my 71 Demon in a few days...it will be interesting to see if I have the same issues as you...will post you back when I know more information...I do have the slant six bars I could look at to compare...James

Good morning, Trying to sort out the parts list to complete my 71 Demon front end rebuild. Going to run the Hotchkis upper control arm pn# 1112. Large Ball joint part. They do make a 1112-s for the smaller ball joints 67-72. But pricing right now is much cheaper on the 1112 ones. My...

Can't wait to try my manual 16:1 ratio flaming river box and full hotchkis front end on my 71 demon...James

Mark, Saw a pair on Ebay and was looking for a set for my 71 Demon! Not sure how much stiffer it will make the front end either...James

Geof, First, thank you very much for your very detailed description and answers to my problem. The photos are most helpful! I have to replace my 71 K member as it is a slant six version and a 360 is being installed. I already have the 73 lower control arms with the sway bar mounts...

I have just ordered a flaming River manual box for my 71 Demon! Ratio 16:1 Let you know how it is once I get the car on the road! You can check it out here: http://www.flamingriver.com/index.php/products/c0011/s0008/FR1540 Hope this helps James

Good afternoon, I understand the lower control arms for the 66-72 and 73-76 are very similar with the exception of the sway bar mounts if they were factory installed. Centered on the 73-76 and end mounted on 66-72. My question is will the 73-76 lower control arms (installed on a 71...