Search results for query: *

1968 Barracuda notch (73) 440 charger motor with 727 trans. all stock - recently replaced the distributor with an ebay distributor the original one had busted threads to both vacuum bolts. and faulty internals giving me bad ignition timing 'tune' anyways i bolted this thing on and it turns...

1968 plymouth Barracuda 318 torqueflite - ignition on dash #1 I am trying to source the wiring connector pigtail connector that plugs into the ignition switch if i cannot source it for a reasonable price i could re do it with shrink tube and all. but looking to see whats out there. #2...

1968 barracuda notch 1973 440 motor at random times my car stalls from either not being warm or stalls because it use to have bad timing or carb tune. anyways... So not always but at random times rarely - the car wont turn over. (wait it out and then it turns over and on) i recently...

last night i adjusted my reluctor gap it was a bit wider than it should have been. .008 feeler gauge. set to) - my question is, is this going to mess up my timing? or anything else ? am i going to have to redo my timing again? :blob::burnout::happy1:

just finished timing my car, here is what i did... 1968 plymouth barracuda - stock 440 mugnum off of a 1973 ( i think 90% sure) dodge charger. no points, electric ignition stock distributor. went to SEARS bought a 60 dollar gun. (pretty good gun actually) got home let it cool down, loosened...

Like a true rookie I took apart my distributor to install a new pick up coil and reluctor. And I went to put it back together and I couldn't figure out how to put it back together. The vacuum advance arm inside has me confused On top left you can see the vacuum advance arm just in...

IMG_3363_zpsvfjxgvk9.png Photo by acerva09 | Photobucket@@AMEPARAM@@http://i184.photobucket.com/albums/x15/acerva09/IMG_3363_zpsvfjxgvk9.p@@AMEPARAM@@184.photobucket.com/albums/x15/acerva09/IMG_3363_zpsvfjxgvk9.p

:violent1: i have a 1968 plymouth barracuda Notch 440 RB - from 1973 440 magnum charger i am having a horn issue it started to beep when steering wheel turns i removed the steering wheel center cap and it seems there some sort of ground issue there touching when wheel turns. has anyone...

my 1968 barracuda 440 recently started having some start up issues. i do not think this to be a cold start issue because it happens after its been running a while as well. its turns over very slow. almost like battery is dead. but last i checked battery was good and only about 1 1/2 old...

Okay guys so as things sit my 440 1968 barracuda had a crispy corroded bulkhead- had some power issues finally the fuse able link wire broke loose. Luckily me I ran into a 70+ Duster in the junk yard and I took that bulkhead with the three connections with even more good luck this happened...

Hello guy took my car out of the garage to work on other car then went back to put it back in and. No power. No lights nothing no ignition brake lights nothing.... Ran perfect for over two years daily driver Battery good Ran cables no luck either Alternator good Never had a power...