Search results for query: *

hey guys. im getting ready to pull my steering column out to rebuild it. it has been making alot of noise lately and i want to go through it and freshin it up while its raining out. is there a kit or anything? bearings to buy? mine has started making a grinding sound so im sure the bearings are...

hey guys. does anyone sell the bolts new that bolt the lower ball joints to the spindles for a mid 70's dart setup with disc brakes. i seem to have misplaced all but one from the junkyard car that i pulled my brakes off of.

hey guys, is anyone running the mopar xhd springs from mancini. i just got mine in the mail and want to install them today and noticed that the two springs are not built the same. one set has all the springs pushed to the front. is this normal? they both have the same amount of springs. sp they...

hey guys. i was going to change my pitman arm. but the nut is pretty big. my biggest socket is 1 1/4" but it was bigger than that. does anyone know the size of the nut so i dont buy the wrong size socket. its for my 75 scamp if that makes a different. thanks!

has anyone ever had problems with locking steering columns. mine has recently started making a creeking sound and has a grinding feeling inside of it when i turn left. when i take the key out it only locks in one direction. which makes me think something is broken inside. is there a column i can...

hey guys. well as some of you may know i just rebuilt my front end with a poly kit from pst. ive put about 1000 miles on my car since then. all is well except for the upper bushings on my right side control arm squeak like crazy. the left side doesnt squeak at all. anyone experienced this...

well ive got another subframe connector question. i have a 75 scamp, which i believe is the 111" wheelbase. ive been looking for subframe connectors but some companies only list up to 74. competition engineering list some that say duster/demon up to 76. i thought the platforms of all these cars...

hey guys. has anyone ran a fast ratio pitman arm from firm feel. i need to replace mine and thought it would be nice to improve the steering in my car at the same time. i know they mention header clearance on their site, which is the only thing that concerns me. thanks

well ive gotten to another speed bump in the progress of my car. since my brakes stuck last week i decided to check if i needed to add grease to my wheel bearings. well one of my inner bearings stayed on the spindle when i pulled off the rotor. it doesnt look like it overheated. it still looks...

hey guys. i was trying to adjust my ride height today and noticed i needed to tighten the drivers side torsion bar much more than the passenger side one to get it to sit level. is this normal since there is a left and right torsion bar or could they be damaged?

hey guys, while i was putting on my new rotors with new bearings i noticed one of them spins smoothly but when i put on my second rotor it makes a light kind of thunking noise. if that makes sense. it sounded like it was coming from the outside bearing, so i went back to the store and got...

did i get the qrong part? i ordered all my front end parts from p-s-t. the idler arm on the right is my original. the one on the left is what they sent me. is this a new design that will work? or just someone giving me the wrong stuff like usual.

so i was working on my suspension today and notice that my frame has a dent on the passenger side like it was hit. after the dent it seems to go off to the right. i compared it to the drivers side. which seems to have a little bit of a deformity on the inside of the frame. which also make the...

hey all, i wasnt sure if anyone has posted a step by step of rebuilding their front end. but i thought i would put some pictures on here. i ended up taking all my dads disc brake parts he has gathered for his dart. this way i could rebuild them while driving my car and the just swap everything...

hey guys. i was taking my front end off today to do all my new bushings when i noticed my strut rods are different. the one on the drivers side has fine threads where it mounts to the k frame. i took this one off fine, but when i got to the other side, my socket wouldnt fit because the threaded...

so i got my old suspension parts out of my control arms. i bought the tool kit from american tool. which came with the small ball joint socket, which is useless to me. i was able to get those ball joints out with a pipe wrench, but i couldnt get the new ones in. so i moved on to my lower control...

has anyone ran the 2 inch drop spindles made by fatman fabrications. they are actually designed for f-body cars. but they are supposed to work. this guy has them on his duster. or does anyone know of ones made specificly for a bodies.