z_daddy
z_daddy
Will 29 x 10.5 -15 Slicks fit on rear of 68 Plymouth Valiant not tubbed is O.E. 8.75 rearend the springs stock location also what rim width and back space will I need ??
Like whatnope, gona take some mods to put them in there.
I don`t have a valiant, but my guess would be to massage the heck out of the inner fender wells, the outer ones as much as possible w/o denting the outer fender, and offset spring hangars. 8" wheel maximum, w/ a perfect offset, and rolled outtter fender lips, w/ the front fenderLike what
It's gonna take a mod to put this thread where it belongs. Joke section? LOLnope, gona take some mods to put them in there.
Well you can joke all you want cause I’m going to mini tub and move springs inboard so this will work!!!It's gonna take a mod to put this thread where it belongs. Joke section? LOL
I don`t have a valiant, but my guess would be to massage the heck out of the inner fender wells, the outer ones as much as possible w/o denting the outer fender, and offset spring hangars. 8" wheel maximum, w/ a perfect offset, and rolled outtter fender lips, w/ the front fender
reshaped to the inner fender contour(before paint). I have 295 65 15 draq radials on a 68 barracuda done this way. I am assuming the fenderwells are about the same on these two cars .. ????[/Well I’m going to mini tub and move springs inboard so this will work!!!
Never mind guys n gals I found the only Solutions :Well I’m going to mini tub and move springs inboard so this will work!!!Will 29 x 10.5 -15 Slicks fit on rear of 68 Plymouth Valiant not tubbed is O.E. 8.75 rearend the springs stock location also what rim width and back space will I need ??
Will 29 x 10.5 -15 Slicks fit on rear of 68 Plymouth Valiant not tubbed is O.E. 8.75 rearend the springs stock location also what rim width and back space will I need ??
Thanks the cuda has a bigger well opening, is yours stock ? Back half
All Stock. I think the wheels were 4 1/2 B/S.Thanks the cuda has a bigger well opening, is yours stock ? Back half
Really!!! Are the wheels 15x8 or 15x10All Stock. I think the wheels were 4 1/2 B/S.
The ones I’m looking at are 15x10 5.6 back spaceReally!!! Are the wheels 15x8 or 15x10
15 x 8 /w 4 1/2" The 5.6 B/S might rub the spring.Really!!! Are the wheels 15x8 or 15x10
almost guarantee it !15 x 8 /w 4 1/2" The 5.6 B/S might rub the spring.
not stock tubs tho-i have a 28x12.5x15 on my 70 dart the wheel are 10 center offset it is mimi tubbed work good