In need of local body replacement GURU

-
Mopar Momzee

Mopar Momzee

Well-Known Member
Joined
Jul 20, 2019
Messages
502
Reaction score
355
Location
Vacaville
Here it is my sister has a 68 dart that the has owned since her teens. It was rear ended 20 years ago or so now she has a bug in her *** to have it repaired. I don’t have the time, she lives in Bay Area, about 20 min from San Francisco. Is there anyone around or that knows of somebody that’s willing to work on it as a side job. There are some big Money shops that will do it for her But i was trying to see if there was someone on here that had free time or does this for side business. Here is a picture
671FA765-E1A0-4BE3-AA0D-530A34C11E18.jpeg
 
Ouch, but no big deal. I can cut it apart and weld it back up. Truck lid is junk, will need a replacement which I know of one. If you aren't looking for perfect but nice I'm here in Wonderfull Barstow

Cheers, Eric..
 
The car still has to be pulled before any work is done . Even if your replacing the quarter which I expected would have to be done. There is more damage then you see. I do this work, Believe me have it pulled and straightened then replace the quarter. Looks to me like you'll need more then a quarter.
 
Make sure your repair complies with all local laws and regulations, as some municipalities in your area do not allow servicing your own vehicle.
 
Oldmanmopar said:
The car still has to be pulled before any work is done . Even if your replacing the quarter which I expected would have to be done. There is more damage then you see. I do this work, Believe me have it pulled and straightened then replace the quarter. Looks to me like you'll need more then a quarter.[/QUOTE
Great when can u pick it up, all BS aside i know she needs many parts trunk gutters, inner outer trunk extensions, thought as to how pulling it out come along? I want the know how. And for pulling it before cutting why. Thanks for the info jesse
Click to expand...
 
Get it to a frame shop for the pull. It's really not all that expensive, but you don't want it done without a proper frame machine.
 
Thank you for your response, I will give u a call work has been crazy everyone spending now. Jesse
 
You must log in or register to reply here.
-

Back
Top