Guess the HP

-
MOPARMAGA

MOPARMAGA

" The other hard member"
FABO Gold Member
Joined
Aug 20, 2019
Messages
10,502
Reaction score
11,242
Location
Yakima Wa
I have my 470 on the Dyno.
3.915 stroke
4.375 bore.
11.4:1 compression.
Howard's solid flat tappet 260-264 @.050 .656-.660 on 108 lsa 104 icl
Trickflow 240s with 1.6 Harland sharp rockers.
Trickflow track heat intake (4150)
Blp 850 with 16 hole annular boosters.
Msd pro-billet distributor & 6al-2
Testing with my 2 inch fenderwell headers &
Pan evac system.
I should get some pulls on it tommorow.

16655465219328580031560194152326.jpg
 
Last edited:
MOPARMAGA said:
I have my 470 on the Dyno.
3.915 stroke
4.375 bore.
11.4:1 compression.
Howard's solid flat tappet 260-264 @.050 .656-.660 on 108 lsa 104 icl
Trickflow 240s with 1.6 Harland sharp rockers.
Trickflow track heat intake (4150)
Blp 850 with 16 hole annular boosters.
Msd pro-billet distributor & 6al-2
Testing with my 2 inch fenderwell headers &
Pan evac system.
I should get some pulls on it tommorow.

View attachment 1715996945
Click to expand...
575hp/ 570 tq
 
Rat Bastid said:
Rumor is the dyno operator is a prick so there is that.
Click to expand...
Oh so you're runnin the dyno. Ok. I got it now. lol

What's been done to the heads? If they're ootb, I'm puttin a cap of 600 on it. If not, well.....more. lol
 
RustyRatRod said:
Oh so you're runnin the dyno. Ok. I got it now. lol

What's been done to the heads? If they're ootb, I'm puttin a cap of 600 on it. If not, well.....more. lol
Click to expand...
They're standard post cnc ported 240's.
If trickflows claims are correct & if can remember what they're supposed to flow between 326-320.
 
You must log in or register to reply here.
-

Back
Top