WheelWise

-
Chuter

Chuter

Well-Known Member
Joined
Nov 17, 2022
Messages
78
Reaction score
84
Location
Lexington, IN
I was looking at that one, too. I ended up getting mad at their AI (Artificial Ignorance) chatbot for not answering my question.

They also have a couple others set up for metric, going down to 100mm. That would probably be easier to modify, if it's even needed.
 
Chuter said:
I was looking at that one, too. I ended up getting mad at their AI (Artificial Ignorance) chatbot for not answering my question.

They also have a couple others set up for metric, going down to 100mm. That would probably be easier to modify, if it's even needed.
Click to expand...
5 on 100mm is virtually THE SAME as 5 on 4 for your needs.
I wouldn't run 5x100 wheels on a sbp mopar.... but for a tool to check clearances and backspace, should be fine.
 
Chuter said:
Has anyone used one of these?
https://www.speedwaymotors.com/Whee...Fit-Testing-Size-Measuring-Mockup,485869.html

My Barracuda is small bolt pattern, this has a minimum bolt circle of 4.5" It also says "universal fit, some modification may be required." I'm nervous about the accuracy after redrilling the 4.5" pattern to fit a 4" pattern. Or is there a simpler modification I'm missing?
Click to expand...
I don't see enough material to redrill to 4" bolt circle. Just ask others what tires, wheels, and backspace fits on their cars.
 

I ended up ordering the metric version of the Wheelwise from Speedway. I'll let everyone how it works. I'm thinking it should be fine.
 
You must log in or register to reply here.
-
Back
Top Bottom