Let's Play "WHAT"S THIS PART "

[RAT ROD AL]

Hey guys I have some more parts I need to identify what they are , more info the better !


#1
Carter AVS - what year & appl

#2
inside hole is 1/4 20 thread. These thread onto my go wing mount studs ! not sure if thats what they really are for.

found

1970 1971 1972 1973 1974 Mopar Go Wing Spoiler Gull Wing Adjustment Bolts/Nuts | eBay

1970 1971 1972 1973 1974 B-Body E-Body Cuda Challenger Charger Go Wing Gull Wing Spoiler Mounting nuts Exact reproduction set of four special ID/OD bolts, nuts, and lock washers that "clamp" the studs of the pedestal mount spoiler and transfer the load to the under deck mounting reinforcement...

www.ebay.com

#3
no Idea !

#4
?????

 

[doug 371]

4 looks like hood pin supports but I dont know for what

 

[RAT ROD AL]

4 looks like hood pin supports but I dont know for what

These were in with 71 cuda stuff. along with some hood pins ! I will look into that ! Thanks for the lead.

 

[doug 371]

I just googled it yes they're for cuda'

 

[RustyRatRod]

Carter AVS. 68-69 340, 383 and 413.

4639S Carburetor Info Page

 

[4spdragtop]

#3 Could they be for headliner bows?

 

[RAT ROD AL]

#3 Could they be for headliner bows?

The screws look like interior screws, But I have not seen these before. They may not even be car related !

 

[RAT ROD AL]

Another part I need IDed
These are 2 1/2" SS. .
Thought radiator hose clamps but way too big.
Don't look heavy enough for exhaust.
???????

 

[RAT ROD AL]

More stuff ??????

 

[Vaanth]

Hey guys I have some more parts I need to identify what they are , more info the better !


#1
Carter AVS - what year & appl
View attachment 1716420597

Carter 4639SA is is an AVS (Air Valve Secondary) carburetor originally equipped on 1968-1969 Barracuda and Dart with 340, automatic transmission, and air conditioning.

Metering rods = 16-160, primary jet = 120-489, and secondary jet = 120-398.

#4
?????
View attachment 1716420600

The pictured brackets are hood pin supports for 1970 - 1974 'Cuda.

 

[Firstblood]

Another part I need IDed
These are 2 1/2" SS. .
Thought radiator hose clamps but way too big.
Don't look heavy enough for exhaust.
???????
View attachment 1716420939

High torque band clamp for exhaust

 

[Vaanth]

More stuff ??????
View attachment 1716420940

The pictured items are universal exhaust hanger brackets. The round bushings fasten to the large hole as a cushion. They can be handy for odd arrangements.

 

[RAT ROD AL]

Hey all you guys are awesome ! Thanks for helping out .

 

[4spdragtop]

Those could be coolant hose clamps for big trucks

Another part I need IDed
These are 2 1/2" SS. .
Thought radiator hose clamps but way too big.
Don't look heavy enough for exhaust.
???????
View attachment 1716420939

 

[Hyper_pak]

#8 as said are exhaust clamps.

 

[JDMopar]

#2 are the hardware for Go Wing or Gull Wing studs, like you suspected. You drop the wing studs thru the holes in the deck lid. Then you screw the flanged (shouldered) nuts up against the bottom of the deck lid. Then you mount the support brackets to the deck lid by sliding the big holes in the bracket over the studs and flanged nuts. Put the bolts in that hold the support brackets to the bottom of the decklid and then screw those other nuts onto the outside threads on the flanged/shouldered nuts. All that keeps the wing from flopping back and forth on the flimsy sheet metal, by securing it to the thicker support bracket and the bottom portion of the deck lid.

 

[RAT ROD AL]

#3 is still a mystery ! Fun rooting through all the bins of parts trying to figure out what is what. But for what I have to pay for this stuff , I have to try to sell everything possible to make it worth while. Lot of time spent researching , looking for part #s. Searching for missing pieces that my be in another bin , or not. Not easy being Cheesy !

 

[JDMopar]

That stuff in #3 is obviously a set of something. 6 of each piece. I've seen it before, but not remembering on what. Maybe hardware to hold door glass to a window regulator?

 

[RAT ROD AL]

That stuff in #3 is obviously a set of something. 6 of each piece. I've seen it before, but not remembering on what. Maybe hardware to hold door glass to a window regulator?

I've pulled more glass than I care to remember! Never seen this before

 

[RAT ROD AL]

Hey what about like the luggage rack ????? Google knows almost all !!!!

 

[RAT ROD AL]

AH HA !!!! BINGO !!!

210-A Mopar E-body Luggage Rack Mounting Kit

210-A E-body Luggage Rack Mounting Kit New reproduction luggage rack mounting kit for 1970-71 E-body vehicles. This kit contains all necessary hardware for installation of your E-body luggage rack.

pgclassic.com

 

[JDMopar]

That's it! I took a luggage rack off a Volare or Aspen wagon many years ago to see if it would work on a 65 Valiant wagon. I knew I'd seen it somewhere, but I've slept since then!

 

[4spdragtop]

Bingo! Nice work there Ace!

AH HA !!!! BINGO !!!

http://[URL]https://pgclassic.com/products/210-a?variant=39533616365737

[/URL]

 

[harrisonm]

AH HA !!!! BINGO !!!

http://[URL]https://pgclassic.com/products/210-a?variant=39533616365737

[/URL]

I am impressed!

 

[RAT ROD AL]

How do you tell if this is for which small block.
Windage tray ?