[WANTED] Engine to Transmission Braces

[Detroit Iron]

I'm looking for a set of engine to transmission braces for an LA 360. My block is a 1975. I believe the 360 braces are longer than 273/318. Thank you.

 

[Professor Fate]

They're also transmission specific, ie 904, 727, four speed, etc.

 

[Detroit Iron]

They're also transmission specific, ie 904, 727, four speed, etc.

Thank you. 904

 

[etngeorge]

I have some braces but unsure what combo they came from. Is there a part number that one could look for?

 

[oldkimmer]

@etngeorge I think u will probably have to measure the length as well as the op should measure the length he needs. Kim

 

[burks440]

i have a couple sets but not schure what tranny they we're used for for 360 engine

 

[Detroit Iron]

Thank you @etngeorge and @burks440 . I will get a measurement and photo tomorrow 7/11.

 

[lemondana]

904 and 727 are the same. The left side got an inch longer in 76 on the 360 . The 318 not till 81.when Chrysler started making the starters longer. Manual transmisdions didn't use them.

 

[burks440]

the left side measures 10 3/8 inches right measures 11 1/4 no pits color chrysler blue

 

[oldkimmer]

the left side measures 10 3/8 inches right measures 11 1/4 no pits color chrysler blue

I think drivers side is longer but I might be mistaken. Kim

 

[etngeorge]

The two from drivers side in left of photo are different. Notice one has two holes at transmission end and the twist at block end is different.
The pitted one appears identical to what I used on 69 340 and 727. Two from passenger side on right are not exactly identical but interchangeable.
I removed them and they could have come from 318 or 360. Should have labeled them.
That white spot is due to shadow.