Slant Sickness !!!

[Johnny Dart]

My latest project was to pull the slant/trans out of my 65,and clean it up.
I built a blue printed,ported,shaved (.90) big valve head for it. 340 valve springs,with a Erson cam. Compression is at 9.23. Clifford intake/headers,Ede 500cfm carb. Pertronix and a Blaster coil will light it off. It was a fun car to drive before,should be even more fun now. Heres some pics.

 

[daves66valiant]

:worthles::worthles::worthles:

 

[GTXperience]

That is the coolest invisible '65 I have ever seen. ;)

 

[65Vart]

I'm digg"in that slant, very cool

 

[HemiPar]

Johnny, that motor looks great. When I grow up thats what i want to do.

 

[Johnny Dart]

That is the coolest invisible '65 I have ever seen. ;)

Dang,you and Dave are fast,didnt even get a chance to load the pics yet ! lol

 

[GTXperience]

Dang,you and Dave are fast,didnt even get a chance to load the pics yet ! lol

Well ... we did give you 4-5 minutes. ;)

 

[memike]

Looks like you have thing going great Johhny Dart :cheers:
I figure if you was driving a stock / you will have an extra 100 hp+
I can't wait to see and hear your results =P~
Dang :cheers: that's a great looking build =P~ Congrat's on a job well dun :cheers:

 

[Johnny Dart]

Looks like you have thing going great Johhny Dart :cheers:
I figure if you was driving a stock / you will have an extra 100 hp+
I can't wait to see and hear your results =P~
Dang :cheers: that's a great looking build =P~ Congrat's on a job well dun :cheers:

Thanks Mike !!!
I had this engine on the dyno before. It was stock other than the headers and 4bbl. Max power was 135.39,with 209.95 ft-lbs.
Like you said,should be a whole new monster.8)

 

[pettybludart]

Looking good!You and Dave are making these Early-A,s so much more desireable.Keep up the great job!8)

 

[Johnny Dart]

Looking good!You and Dave are making these Early-A,s so much more desireable.Keep up the great job!8)

Thanks Petty !!!
Cant wait to see that 66 stroker !!!

 

[Shishaldin]

That slant shore is purrrrrty

 

[Hyper_pak]

Great job! I noted some letters or marks on your head between the valve cover and intake/exhaust flange. Could you share what is there? I have one with a star, one with numbers and one with 3 screw heads. All are old castings 2206035-1 and 2208086-4. Any idea what your head number is?