Recent content by 1964 barracuda

do i have to buy an aftermarket radiator with the trans cooler adaptor or can i run a universal parallel with the stock one

does anyone know how to swap a manual trans to an auto in detail? help is really needed.

how much trouble is it to make a 360 crank fit into a 318. would i have to have 4 bolt mains put in and would there be clearance issues

how much trouble is it to make a 360 crank fit into a 318. would i have to have 4 bolt mains put in and would there be clearance issues

the block is off a 72 duster so the compression is like 8.5: 1, i would like to have it closer to 9.5: 1. should i get it decked or do they make pistons to fix this problem

the block is off a 72 duster so the compression is like 8.5: 1, i would like to have it closer to 9.5: 1. should i get it decked or do they make pistons to fix this problem

ive got a 318 that needs to be pepped up does any one have suggestions for a cheap rebuild. ive also have a set of 596 heads off a 360 that have been angle milled .040, would i be able to use this heads

ive got a 318 that needs to be pepped up does any one have suggestions for a cheap rebuild. ive also have a set of 596 heads off a 360 that have been angle milled .040, would i be able to use this heads

does anyone know where to get an 8 1/4

try laysons.com, they sell some different choices in hoods. got transfered from this site to them one time :grin:

how hard would it be to install a 8 1/4 into an orginal 7 1/4 rearend barracuda or would it even be worth it? i plan on having around 350 hp at the fly