I bought a set of brand new stamp steel upper control arms. I have to assemble it(bushings and upper ball joint). Should I put any anti sieze on the threads of the upper ball joint? Lastly, I don't have the special socket for the ball joint. Rather than spend the money from mancini racing can I...
Thanks guys. I was doing a bit of research. I've come across SK speed for my rebuild. They're located in long island ny and he seems incredibly knowledgable which is a bit if a relief. He also suggested against kb Pistons. Suggested either TRW forged or Ross pistons. I'm sure a bit on the heavy...
Any reason for a 1.6 rocker arm? With my setup along with the heads, do you think I'll be restricting and running lean? Reason I ask for this is cause I want to use a 650 carb and edelbrock rpm dual manifold and 3k stall converter. Thanks again
What's your highest compression ratio without any use of methonal or any cooler. With a somwhat aggressive cam and 10:1, think it'll be fine on 93 octane?
60403 Details
Voodooâ¢; Camshaft; Hyd.Flat Tappet; RPM 1800-6200; Adv. Dur. 268 Int./276 Exh.; Valve Lift .494 Int./.513 Exh.; Lobe Angle 110 Deg.;
if you can give any input that'd be great.
I was looking for cylinder heads upon my 68' 340 rebuild. Are the comp cam beehive springs durable enough for a lunati 60403 cam? Are these bronze valve guides? Regardless price looks great.
Any reason as to why some brake lines loop 1 or more right after the master cylinder? Since doing the front disc conversion it looks as though I'm going to have to replace all of the lines. Instead of buying a kit, I'm just going to make my own.
Their service sucks indefinitely. I ordered $1200 worth of stuff and still haven't recieved the majority of it. It's been over a month and I've callen about 5 times and each of those times I was assured to get it before the end of the week. I called today and there's a order for 3 people and my...