Recent content by 423dak

  1. 423dak

    M/T Pro Bracket radial

    Never ever close to proper air pressure. Too bad great tire.
  2. 423dak

    M/T Pro Bracket radial

    Caltracs are spot on where mine are. 17.5 is no where near 22. Radials need more air not less. See mickey's Web site.
  3. 423dak

    M/T Pro Bracket radial

    As far as I see you are not running enough tire pressure. I run mine at 22psi and it hooks well. Car 60s 1.56. Burn outs need to be much smaller then bias ply.
  4. 423dak

    Lots of Mopars racing in Canada

    I'm up here in Atlantic Canada. There is many beautiful Mopars up here. All of the East Coast American and Canadian there are many.
  5. 423dak

    Upper and lower bushing/bearings?

    Is there anything out there that will eliminate the bind from the strut rod? I'm running the car as a stocker so I don't think tubular is allowed. Thoughts, comments, links?
  6. 423dak

    Motor is seated and ready for it first 1/8 mile stomp

    I agree with flyfish. What octane do you get by mixing the fuel?? I faught this all summer being cheap and mixing fuel. I tried straight Av gas which didn't work. I then switched to straight 110 Sunoco and the car picked up 0.70 seconds in the quarter. That is a 12-1 cr engine. I could not...
  7. 423dak

    Monster Wheelie

    That's a Demon not a Duster. But I did see you under lined Duster so maybe I missed something.
  8. 423dak

    Dart debut

    I don't know what to say. My brother's 72 Duster weighs the same to. Car has all old wiring out of it and there is no radio, but everything else is there. Full interior with roll bar.
  9. 423dak

    Dart debut

    There looks to be a lot of tire under your car. And is it not a stick car? Tires will kill low HP in my opinion.
  10. 423dak

    Dart debut

    Yes sorry 3123. I did trim the lip of the well some more to give me the clearance. I have run the 28's for 2 seasons. I do admit the car runs well, but those Magnums make power and it does have aluminum heads on it which flow real well.
  11. 423dak

    Dart debut

    2123lbs 750 holley 4150 with a choke horn. Cars fits in IHRA stock CM.
  12. 423dak

    Dart debut

    LOL this is an old post. I am heading into my third season with the car. Last year it ran the best of an 11.67 at 113mph 1.59 in 60'. Not bad for a stock bottom end magnum. I am about 2 1/2 hours from PEI, the bridge fee is not too bad. That track and Miramichi are the closest and the other 2...
  13. 423dak

    Hey. Got your friend request. If you are ever make the trip to Miramichi to the Drag track keep...

    Hey. Got your friend request. If you are ever make the trip to Miramichi to the Drag track keep an eye out for my car and stop by the pit. 72 dart green running in the pro class. Maybe bring the nice little 67 up and try it out. Cory
  14. 423dak

    china airgap intakes on ebay

    My bad. It does not have A/C. I didn't plug my holes either.
  15. 423dak

    china airgap intakes on ebay

    Why? I have used one on my magnum with the serpentine for 3 years. I bought due to the price but have since bought an Eddy. I will be posting dyno differences of the two when new engine is complete. Bang for your buck for a junk yard magnum setup I wouldn't hesitate at all. My junk yard magnum...
Back
Top