Recent content by 67GTS

Way late but here are the pics of the car.... http://www.picturetrail.com/sfx/album/view/11502219 There are some pics at the end of the car after I stripped off all the mouldings etc. Does that look like a car that had the rust issues that the dunce at Superior told me was the cause of the...

Wife's car

Anyone know what the differences are between the 63-66 sending unit vs the 67 and up? Year one lists separate units but there is a guy on ebay selling one unit for all years. I'm not sure what the differences are and I'm wary of ordering the unit on ebay only to find it won't fit the 66...

Got a brand new boot for it. Just needs to have the snaps installed on it.

This is my wife's car. She worked on just about every part of it during the resto and she did most of the interior work herself. http://www.picturetrail.com/gallery/view?p=999&gid=11502219&uid=2764316

I inspected the pins and they look fine. I am still using the AMP meter set up.

This is a new wiring harness. I had the same issues with the old harness. I went over the new harness carefully and traced every wire to insure that it all was going to the right terminal.

None as far as I can tell but turning the lights on used to peg the temp gauge. It looked like it worked fine with the lights off. Now that I added a ground wire to the back of the circuit board, I get nothing out of the gas or temp, lights on or off. I'm out of ideas.

I believe the ground at the tank is fine. Again, it's not just the gas but the temp gauge isn't working as well. I'm planning on replacing the light switch next.

So now that I've been reading Glowworm's wiring issues, I am starting to wonder if my issue could be related to the headlight switch? The switch seems to work properly but when the previous meltdown happened, the old headlight switch connect suffered a partial meltdown. Could it have damaged the...

We've got a 66 ragtop that has had this issue for some time now and I just can't seem to track down the problem. First, a little history, the car definitely had a melt down at some point as the fuseable link had been replaced and the wiring harness was a mess. I replaced the entire dash...

Ok, so I thought I should put in a good word for the guy who fixed what the butchers at Superior Interiors did. If you're looking for top/upholstery work in the NH area, I recommend East Coast Upholstery in Hampstead NH. Willy did a great job fixing what the monkeys at Superior had...

I sold my 67 GTS 383 over a year ago. Heard it did pretty well at the Nationals too. Saw it go on Ebay a few months ago for over $40K.

Anyone got a pair in decent shape for reasonable cash?

Looking for the trim that runs along the rear deck from the back doors.