Recent content by 67notch

That is a really large set of castors in that last picture! You say you can get those at harbor freight?

That looks nice, but that lady sounds angry!

If the deal falls through I’d be interested as well. Thanks Scott

I’ll definitely be following in hopes that someone has first hand experience with one. I wonder how durable they are or if there is any type of warranty on them.

I’m with you RRR I really need a good shoplight, but man $130 is a little steep.

Dang, that’s a good lookin car for $850. Somebody better jump on that.

Great idea. Thanks for sharing. I am just getting ready to put mine together and I will definitely use this.

I used raptor liner inside my old cj-7. Took special care to prep it really well down to bare metal. Followed the instructions to the T. Within a year it was pealing off. Just one mans experience for what it’s worth.

Rams 49

I was just bitchin about this the other day! I have the same problem. Either too big or too hot or not bright enough. I have gotten to the point that my go to is a head lamp. Not perfect, but it usually puts the light where you want it without having to move the light every two seconds.

Roadart, I’m having the same issue. I was curious if the DMT Gasket fixed the problem or if you had to bend the tabs. Thanks, Scott

At the very least, even if you don’t want to deal with the hassle of the return, leave feedback. That’s the way that other people know if they can trust that seller. If you don’t leave feedback they can just do it again and again.

Neverending project! I’m learning to enjoy the journey and not the destination. Been working on it for several years with my dad. He’ll be 72 this year.

Happy new year!

So the wing window attaches at four places in the door. The yellow is the double nut. That goes to the front of the door behind a plug that you can see from the outside of the door. The blue slides over the peg that is also accessible behind a plug in the bottom of the door. Hope that helps...