Recent content by 73Charger318

Here you go. Also three ports. No cracks or issues. New filter. No unusual rattles.

Would one out of a B-Body Charger work? It came out of a 73 or 74 car, can't remember. I can send pictures if you would like.

63 GT front hood medallion - 2276-947 (that's in parts book, but I've also seen the GT emblem being sold as 2276-942 on here and eBay. 63 GT passenger side C-Pillar medallion - 2422-632. The drivers side is 2422-633. I have this, but if you had the set I would consider. The "E letter for 63...

Thanks for the advice. I've actually already ordered two 195/60. I think a 195/50 would be to small, takes it down to a 22 inch diameter, but maybe a 195/55 if the first option doesn't fix it.

And of course they have to have the 5x4 bolt pattern. I found some 14's on eBay, but not the correct bolt pattern. Thanks!

Thanks. Problem is I've only seen 15's. If I could find 14's I would just slap two on the front with new tires and be done. If you've seen 14's let me know!

Thanks!

That I don't know. I would think keeping the aspect at 60 should give the tire a similar fit on the rim. I may try this, sure beats beating on a fender. Under 200 for the two tires.

215/60/15's on back, 205/60/15's on the. front. Do you mean staying with 15's, but maybe a smaller tire, like a 195/60? That would save me a half inch of height and almost a have inch on the width. Would be a lot cheaper than all new wheels and tires.

These are 15's and I believe 15x7. I have messed with the car height some already. That may be what ends up having to be done, but I really like the stance better higher in the rear. Would have to raise the front up quite a bit. If anyone is putting a drum to disc conversion on one of these...

Probably, but not that I can see with them on. I'm pretty sure US Wheel doesn't make this wheel in a 14 inch, so really just looking for something similar. But hopefully I can make the 15's work. It may take a little front fender "massaging".

I'll bid, you pay. Deal? lol

Can someone help me identify these? I was told they were American racing torque thrust but can't find the similar wheel. These are 15's, and after a disc brake conversion I may end up having to sell them off for 14's. I'm getting tire rub on the front now. And of course I need the 5x4 bolt...

I see nothing in the VIN that concerns me, just the incorrect fender tag. VIN checks back to a 67 Barracuda with a 273 V8 from factory. Was concerned with a V8 having a 7.25 rear end too, but I guess that was pretty common for an automatic 273 that year. I also get a 77 Buick tag, but still...

Hello all, Looking still at trying to buy a driver quality Barracuda. I came across this one, but this fender tag scares me to death. I'm trying to figure out how this fender tag got on the car. It appears to be from a Camaro or a Chevelle. Or possibly a Buick. Rest of the car looks legit...