I bought this radiator, Now looking for an electric radiator to go with it. Any help is welcome!
RadySpeed 4 Row Aluminum Radiator For 1971 1972 Dodge Dart Plymouth Duster Valiant 5.2 5.6 https://www.amazon.com/dp/B09NNDV6S3?tag=fabo03-20
I believe it is a stock converter. I have never really messed with converters let alone high stall converters. I like the thought and idea. Now have to research it and see how may spline shaft i have, and what size converter. I guess I would be looking for bottom end torque to spin the tires
I have a 1972 stock 318 other than eddy 4 barrel and intake with stock manifolds
Does not smoke at all
727 transmission
8 1/4 suregrip rearend 3.23 gear
I would like more power and reliability I drive on the street and highway mostly I want to be able to jump on the highway and run 70 mph for...
Ok this is my dilemma
I have a 73 duster with a stock 318 other than edelbrock 4 barrel and intake
I have a msd ignition system to install
Long tube headers and a mild purple cam
I have enough in my budget to buy a holley sniper system or mopar performance aluminum heads P5153849
What is my...
Ok question while transporting my 360 with no heads on it my ratchet strap broke going around a bend and engine rolled over and all the lifters came out on one side of the engine and scattered in the bed of the truck (lifters not damaged) can I reuse them even though I don't know what bore they...
Ok new question while transporting the 360 with no heads on it my ratchet strap broke going around a bend and engine rolled over and all the lifters came out on one side of the engine and scattered in the bed of the truck (lifters not damaged) can I reuse them even though I don't know what bore...
Well I bought the 360 it has the crank pulley,flex plate and a moroso pan on it just have to do some investigative work to see if the pan is correct for an A body
Ok I have a 73 duster 318/727/8.25 rear
I have an extra 318 long block (stock) and a chance to get a 360 short block (stock)
I have a set of j heads that have big valves and some port work
I am wanting to build a street machine that can hit the highway for a few hundred miles and still have fun...