Recent content by 75dart

Im going to use some 360 heads and put 2.02, 1.60 and ported.

What duration and lift should I go with on the cam.

I want to go with iron heads. I heard that you can put the big valves in the 302 heads and get the compression ratio up. Would I be better off doing that or run some other heads. If I should run other heads what ones should I run. Is the RPM air gap a better intake on this application and the...

I was looking to build it without a stroker kit.

I want to build a 400HP 360 to go into my 75 dart sport. Is this in anyway possible.

I want to use iron heads so what heads would I have to use on a 408.

Do you think that I would be better off building up a 360 because it would be cheaper and still get alot of power out of it.

Thanks for all the help. Now I have an idea on what im going to do.

I dont have the converter or the gears yet. The car is going to be steel maybe a fiberglass hood. I probably will go with 265/60/15 or 265/75/15. Im going 2 go with the hyd. cam. What stall convertor should I use and what gears. I wasnt sure how big I should go with the cam because i want it...

I found that Ohio crankchaft has the stroker kit for 950 and thats a little cheaper than mancini racing. Thanks for the help.

I have a 1975 dart sport and i will only drive the car maybe 50 percent of the time. It will be mostly street use but sometimes Ill take it to the strip. I have about a grand after i buy the stroker kit. I want to run iron heads I just dont know what ones to run. Im going to put 3.91 and run a...

Im planning on building a 408 stroker and I was wonder what size cam I should run, what cylinder heads and intake

I was wondering if anybody could tell me were I could get a 408 stroker rotating assembly for the lowest price.