Recent content by adamm

Hello everyone I just moved to thunder Bay and am wondering if there any reputable engine builders in the area? I have 400 B that I would like rebuilt as I go into the final phase of my build but I can't seem to find much searching on Google

Did this sell or is it still available?

Still looking. This sits behind the dash and controls the heater box vent doors.

Still looking.

Thank you for checking!

I'm looking for a cheap pair of front fender braces for a '74 dart sport, the flat ones, stamped like small angle iron, approximately 14.5" long — example pics attached for reference. I have a shipping address in Minnesota (55768) and Winnipeg (R3G 2C9).

Looking for a dash vacuum actuator tubing harness for a '74 dart sport. See pics for details, mine was cut when I received the dash.

Thank you again! I get ya, PTFE... haha, I didn't realize the "T" stood for teflon. "on the cheap" means I have access to discounted QUALITY products, specifically some Russel PTFE 308 SS Braided hose. The parts are by no means cheap in quality, just a heck of a price cut. Sorry for the...

Thank you for your thoughts! I will have to research more on teflon lines as I'm not familiar. One of the biggest concerns I've read is that the braided lines allow for some expansion, creating a softer pedal and more travel before the brakes engage compared to hard lines. I have also read...

Forgive my lack of knowledge, but are there any concerns with forgoing the hard line from the rear distribution block on the axle to the driver side bracket, and just installing a one piece stainless steel braided line directly to the caliper instead? I'm putting all new brake lines into my 74...

Sale pending will update once I confirm one way or another. Thank you for the responses!

I'm looking for a cheap pair of structurally sound front fender braces for a '74 dart sport. I have a shipping address in Minnesota (55768) and Winnipeg (R3G 2C9). This is the brace that supports the lower front fender. Thank you for your consideration.

Thank you for your help!

Thanks a ton, I ordered one up today!

Thank you for all the information, I really appreciate it! I have replaced the tank, pump, and sending unit with a setup from Tanks Inc., so certainly not a factory-correct resto. - Fuel Tank, 16 Gallons, Steel, Galvanized (Mfr. Tanks Inc #: TCR11D-T) - Fuel Pump, 340 LPH, 100 Maximum PSI, Each...