Recent content by amoparacer

Okay these are driver quality have some dents and scratches would need full resto for show car but hey the are almost 50 years old. The are listed on Ebay for 495 free shipping if some one here wants them Ill let them go for 450 free shipping ground in the USA lower states.

Hey good luck hope it run right for you.:cheers::cheers::cheers::cheers:

CalleD MAXIFUSE here is a picture of the fuse. Holder is 10 gauge wire and a nice Rubber Clam Shell bought them at Oreileys.

Oil pan of a 904 is square with one corner missing. 727 is very irregular here are the pictures of each. First is 904 Second is 727 :wav:

Okay well I removed the MSD from the car and its now running fine on the stock ECU so its off to MSD for repair or replacement. Also for the old wiring sake I in stalled 10 gauge feed from the alternator directly to the battery through its own 80 amp mega fuse. Im now using a voltage monitor...

Okay so i bought a test light and 5 blade fuses first i unplugged the alternator no change then the starter no change then all 5 bulk head connecters then I used the test light and still found draw on the blade fuse replacement for the fusible link. My MSD box that was installed in January was...

Replace it with stock rebuild 78 amp wanted the 120 but they needed to order it. My buddy said to remove the power lug from the alternator and test from the lug to a ground with the Ohm meter if its grounding from there its a dead short. So i will try that monday. With the key off and I replace...

Hey I want it if shipping is not to high... Herriman Utah 84096 let me know. Also looking for 76 gauge assembly and bezel. Make sure it has foam on both sides inside box for shipping PLZ.

Okay so driving the Feather Duster in traffic and fusable link from Pos battery to relay blows. My buddy says alternator may be the cause. Any advise on how to chase is down the short alternator was replaced a month ago so its under warenty. :banghead::banghead::banghead:

Think the numbers read 6EE 2085 or 6EE 2885

Okay here are pictures of the switch I need. The little tab that moves the switch inside broke off so for now Im just un plugging the switch when the car gets hot.

Check shipping to 90731 should be 5 buck if you use USPS\first class 40 shipped and we have a deal I really only need the blower switch but hey.

Hey I need a blower switch only not the complete controls or bezel. Would like to pay 10 bucks plus shipping. Here is a picture. Im in california 90731. So only the blower switch top picture working one would be great. Mine broke after replacing the heater core went to flip blower switch and it...

Electrical switch here is a picture.

Ill give you 30 plus shipping.