Recent content by andy007007

unfortunately I don't have the wheel clearance for fenderwells

thanks for that I was hoping to try and find some 1 7/8 that I could massage in as I will be pushing 600+hp through them - I have been going backwards and forwards trying to design some headers - and keep getting frustrated at them - I thought If i could just mod something to make work it...

Has anyone had any success with headers on a RB. I have a 75 duster with Schumacher spool mounts and a Borgeson PS box I have heard that TTIs will fit with a bit of flattening thanks in advance

the reservoirs and plumbing are no issue - what i'm wondering about is any one that has done it how much they modified the existing steering pedal bracket to accommodate the pedals it's the actual mount assemblies i want to have a look at I know there are a couple of cars around with complete...

Wondering if anyone has done a reverse pedal box install on their a body I picked up a wilwood reverse pedal box at a swap meet and am looking at ways to mount it Keen to see anybody else’s install

picked up a NOS set of ebay earlier this year for 250usd been hunting them for a while - basically I set up a google alert which is how I saw your message

yup unfortunately in NZ and Australia they have requirements for a emergency brake so have to have one

i have one from a vh valiant mocked in place and it will work - just not 100% happy with it - mount was pretty much just a piece of angle - what i'm not happy with is when you pull it on it flops back down - but not enough for my corbeau seats so you have to lift your *** up and over the...

still on the hunt if anyone can help

that looks like the sucker I'm after! how much you looking for? cheers Andrew

hoping someone can assist, I need a truck (rear sump) oil pan and pick up for a 225 will also require it to be shipped to 90620 many thanks in advance cheers Andrew

Looking for some good cond 70-72 Duster doors complete with regs/glass/door cards prefer in California, as will be there from the 25th May to 8 june so can pick up cheers in advance Andrew

Hi looking for a 75 duster grill with no broken fins, hoping someone can help I will also need shipping to 90220 cheers Andrew

Many thanks for the responses. I have bushings to go in the levers. I am just using some threaded rod and old female rod ends I had lying around. Will eventually tap some 1/2" rod and use some male 3/8 rod ends. I wanted to try and keep the rods straight as I can be a little hard on gearboxes...

75 duster /6 904 originally, now 440 RB 4 speed Torker II intake 800 cfm Edelbrock, ported heads, Crane 550 lift cam Harland Sharp Roller rockers. spring relocation, mini tubs a work in progress. mostly lots of boxes of parts at the moment. Headers have been the worst part so far.