Recent content by BlackBrick

Okay, here is the weekend update: Shaved door solenoids installed and tested (still have to hook up the controller and the microswitches). Wired through 4 relays with a manual safety release. Front and rear power window motors mounted, wired, and tested. Wired to dual relays per window...

Yeah, the extra 1/4 inch clearance was all I needed for the colibri style. I intend on posting some pics on what I ended up doing to give enough space for them. The dash cluster isn't too hard to get out on mine, but its the short box one. Posted via Topify on Android

Nope, I just "borrowed" your locations. Got all of that done, just took patience and a doublecheck of the holes I was drilling.

Thanks man - I keep plugging along. A couple of friends and I are in the process of shaving the door handles and installing aftermarket power windows......way too much wiring for my blood. :) Interior Door panel redo - I recut the actual panels in 1/4 inch MDF. I had to create some spacing...

Just the wire holes. I used your location as a guide, but going through that area under the hinges, the hole goes through 3 pieces of sheet metal. I guess I will just heat shrink wrap the heck out of the wires and then fish them through. Again - killer build - loving the 68

Dang man, that rear seat came out awesome. Good info on those arm rests. The 72 4 door uses the same arm rests and pads like the 68. Mr Moparts is a good source for them if you need them. Any tips for popping the holes for you power locks? Running wires to mine for shaved door handles and power...

Bumpola. I know someone out there needs these.

Using UPS, looking at about $150 to ship the seats, based on very rough estimates. I dropped the seat set prices by $50 because of this.

Okay, picked these up from another member here to use in my 4 door, but ended up getting the factory seats redone instead. Black vinyl and and heavy velour. The installed materials does not look factory at all, but is in pretty good shape and is pretty sturdy. Seats have head rests that look...

Thank you sir. Love what you're doing with it.

Nice looking ride man. Hey, quick question - are the rear armrest and bases the same size as the front ones? I took mine off a while back, seem to have misplaced them, and will be hunting down a set to put back in my 72 4 door.

See, now you guys got me worried about it - The brake setup is off an Aspen, both front and rear, and the prop valve was not available when i got the front and rear setup. I have the prop valve on the front brakes......hrm. I had the brake system checked for balance at a shop and they said it...

Okay, I did the dash in 2012, in the summer. I grabbed whatever color spraypaint was closest to the interior color, 1972 Y4 Light Gold, (it was not even close). Seeing as I was working on the low dollar, I went head and did it up, repainting the dash with the tan color I got, and then redoing...

Pm sent on blask arm rests and bases.

Can you PM me a pic of the front and rear arm rests? Thx in advance!