Recent content by cdstl

Craig is an old friend and he’s wondering if anyone has seen his old Demon bracket car. He sold it around 1983 to build a Super Gas '83 Mirada. He raced primarily in Cordova and Byron. This was the last time that he raced it and sold it the next day to a guy from Wisconsin. He thinks his name...

I've got a You Tube channel as well. Just started it since watching vids is what I do before bed. House of Mopar

Tim, I'm from Savanna and Craig McCaughey just told me that you've been in touch with him. Chuck Dannels

Thanks for the input guys.

Do you have any rubbing issues with the 225s? Do they stick out past the fender at all? I ask because I have a set of police wheels that I can compare the backspace to my steelies.

I kind of figured that the 235s would rub but I wanted to hear some first hand experience. I imagine that we will end up using 225s. I have to check the backspace on the 15x6.5s. I have a 275.60 15, 4.5" BS rallys on my Cuda so we will test fit them on his car first. Thanks

We're doing a disk brake conversion on my son's car and that means going to large bolt pattern wheels. I have a set of 4 15x6.5" steelies. I want to purchase a 15x8", 4.5 back space steely for the back and run 275.60 15. For the front I would like to use 2 of the 15x6.5" and run a 235.60...

Here's some pictures from the Mecum auction... 1970 Plymouth Duster | G107.1 | Indy 2016 | Mecum Auctions

Ok, good. It's a console auto EK2 with white buckets. November 20 SPD and a Monroney sticker too. Not sure about the build sheet but it has a ton of paper work. Evidently someone has marred the paint a bit with an orbital polisher. It sounds like it has made the rounds a bit and maybe sold...

I understand that all of the 70 Dusters had the Valiant fender badge that year. I was also under the impression that the V8 badge was left off of the 340 cars and only on the 318 cars. Well, my buddy just bought an original 5000 mile 340 car that has the V8 badge on it as well. I know with Ma...

Thank you sir

I pulled a non-A/C heater box out of a ‘75 Dart because it was clean and easy to pull. The question is what other A bodies will it fit. I posted on Moparts and got the reply that it may only fit '73-'76 A bodies but I just want to ask the same question from you guys. ‘67-‘69? ‘70-‘75? All of...

I had the exact same thing happen to one of my Ultraflows. The weld wasn't even close to being centered over the seam. Rewelded it and it has been fine.

The stock Duster rear brake hose is 14". An '86 truck hose is 26". I would imagine that I can secure it to keep it away from anything that would damage it. Does this sound like too much?

I got a set of Monroe Sensa trac 58577 coil overs for my Cuda. I had the parts guy reference the shock and they fit a ton of B bodies plus several more makes. That's what I plan for the Duster. Extended 22.5" Compressed 13.75" Travel 8.75" Thanks