Hi guys i was just wondering if you could help me with a problem. My turn signals won't work but they were working before i took out the radio and drilled a hole in the gauge panel. I've checked the turn signal flasher by the radio and it does not have any power going to it when i turn the turn...
Im not home right now but i will put some pictures up in a couple hours and i got a new ignition control and it only has four of the prongs when theres 5 wire holes
I have a 73 plymouth scamp with a 83 318 i have power to the coil but i don't have spark from that or the distributor. I replaced the cap and rotor and the coil but it still will not start. It was working a couple months earlier.
I looked at my distributor and it does not have a vaccuum advance it is an electric preset one. Also where would i be able to find a set of 302 swirl port heads?
I guess its not all stock lol:newb: But i was wondering what kind of heads and cam i should get with the stock pistons. I've seen people saying that 360 heads make it a dog off the line and others say its great. So if you guys could give me any ideas that be great:prayer:
thanks
-chris
My dad and i already timed it we have a brand new distrubitor, spark plugs, coil, solenoid, and starter. Our distributor also does not have vacuum advance.
i have a 340 cam in it and an iron intake 4 barrel. The heads are headman headers and the heads are stock 318 heads. I also am not sure how to re curve the distributor