Recent content by Darthemi75

i have kb107 std pistons.....i only want to know how much cc chamber i need to make 9.5-9.8 compression ratio....

I have 360(Std bore) with KB hype .flat top pistons, and i looking to make 9.5-9.8 compression ratio with my J Heads # 3418915(millodon 2.02-1.60). My question is: How much chamber CC including my gasket do i need?.... to make 9.5-9.8 compression ratio????

i have a 360 KB hyper STD pistons (4 bore) What ring end gap is better for an street mopar: 1 ring= ? 2 ring= ? 3 ring= ?

A leak on my intake could be my problem???????????????? i dont know if there is a leak is a recomendation of a friend....to change my manifold gasket.

My camshaft is the o.e replace 268-284 mopar...i prefer to find the cause of my problem....and electric vacuum its my last chance....

I have a 440 on my dart and it doesnt stop..... i use a vacuum gauge and see that my engine no produce more than 5 inches of vacuum...... i use the vacuum of other car with a hose to check my brake booster...and my car stops great. I dont know what is the problem....a friend tell me that i...

318- 0.30 piston Speed pro Hyper. What ring gap use?????? for the 1-2-3-ring...

Which is the best manifold for a 360 engine: cam: 284-284 MP DCC-4120231 - rpm 2600-6000 4 speed trans roller rocker 1.5 Single plane or dual plane? someone said depends on your cam Operating RPM Range.. is that correct or not?

So.. to resume all the posts: 1 ring gap: 28" 2 ring gap : 22" 3 oil ring: ???? I only want a street restoration car.

i don´t know where are they...oppps

i don´t know the ring gap for the second ring, and what gap is better for the oil ring.

I bouth a set of kb237 flat top hypereutectic pistones for my 440 .030 Original Chrysler Manual says .013-.023 ring gap but i dont know what is the best for a street car. Whats your recommended ring gap for first, second and third rings. Thanks

IS .0000

i bought a comp cams 268-280 cam for my 440, and the person who is building is using a clock to measure the part in the cam where the the bearings go. He told me that in the center it has 9-10 thousandth of variation and the ones on the sides have 7 of variation. Is the cam bend or not?

I dont understand Why on some web pages the comb chamb are diferent ... for example you and a friend told me that 906 comes with 88cc, but on a page said 79.5 (http://www.cowtownmopars.com/CastingNumbers.html).