Recent content by downundertdart

..quick non eventful update- Black Friday order all placed with east coast moparts and summit - and looking at going the Jeep factory stainless headers and modify to fit ..can’t afford the $1500 plus landed in oz bare tti headers

... there you go thanks curt!

Not sure, big guns? Lol ... nah I was searching online and seen something about truck blocks are stronger and have bge while cars have a different one and not as strong??

Thanks, I also didn’t realise these later model crate engines are the stronger ones? (Unless I’ve mis read the internet lol) - it’s an BGE block

Cheers! What fuel press regulator did you end up running ? Nice looking build!

Thanks for the replies , nah it’s a proper lhd dart, GTS actually, have access to buy the Jeep manifolds which by the sound of it can be welded .. either that or TTi ones are about $1650 plus landed here ... excuse the mess in the photos, currently building a patio for the wife so everything is...

Hi Ralph, did you end up using the standard headers? I have. A new crate 6.4 with tti mounts and putting it in my 68dart so trying to work our if the standard ones or Jeep srt ones will fit? Cheers ...awesome work on your dart!!

Afternoon folks, My new 6.4 crate engine has just rocked up and I’m working out fitting it into my 68 dart GTS, I already have the tti biscuit mounts and that’s it for now, I’ve gotta order the new sump etc etc.. just wanting to know if I can use 6.4 Jeep manifolds or will they hit the firewall...

hi all, just before I do an order for a fuel sender and headlight bezels for my 68 dart gts, does anyone know of any company that sells the trim that runs along the top of the doors and quarter panels? Thanks for the help, Luke

And just to check what axel I have before I order ... here’s some pics of it(suppose you can never trust older cars - if people swapped things on them over the years..

....just had an engine builder/drag friend come by ..he suggested axels as well..so just gotta finish up pricing over here and the rest then I better order!

Thanks for that .. yep, they would be Illegal cos everything is here!! So just gotta ring moser then to find out there price .. and does anyone know if dr diff axels are as strong as moser ?

... so just had a look and talked to dr diff, the rotors that come with the pirate jack kit have the bigger axle centre (is it a flange(on the axle face?) .. so can I get a spacer made up to take up the distance between that inner flange and the rotor centre hole? (That’s if I don’t get new...

... currently engine is a 360 with a mopar purple cam and 3200 stall, but I’m inheriting my fathers twin turbo 360 engine made 540hp at the tyres(he’s going to an hellcat engine ) ... so then if I did get new axels who’s best or cheapest but good ? Dr diff seems cheaper than moser and haven’t...

.... so pretty much keep lugs tight, and then once redrilled, pretty much gonna be splines etc that will strip/brake -not the redrill part of it...thanks very much..makes me feel a bit better for buying the rear brake kit !