Ok guys I have another question. I have the TTI motor mounts what do you torque them to on the block? The service manual for our cars says 45 ft pounds. What do you think
Pat Faley
This is what I came up with hopefully this will work fine I was able to use the 45 degree oil filter hook up and mounted the tti mount. What do you guys think
Pat Faley
I have another question about when you use the block off plate for the oil filter and install the remote filter. There are two oil sensors that get removed do you have to plumb those sensors back into the remote lines? One appears to be the oil pressure sensor the other might be a sensor to tell...
Ok guys I have another question this motor I have was missing some things that I have no idea about. In this picture is the back of the intake, what is missing from here? It is a 2017 5.7.
Thanks in advance
Pat Faley
Just doing my first day of searching for parts but finding out right now that the 73 and up center link is not to be found. I haven't tried any junk yards yet but from my first search no one sells them brand new unless you guys have any sources.
just curious
Pat
I was planning on using my 69 kframe and stick with the biscuit type of engine mounts. That is why I am asking the question about which oil pan I should buy if I also buy all the 73 and up steering stuff. Is it Holley or something else.
Thanks
Pat
Ok
I have been reading through this post and have a question. The drag link, pitman arm and idler arm has to be changed to 73 and up. when you do this upgrade the Holley pan will fit? Still taking notes to do this swap so all this information is great thanks guys.
Pat Faley