Recent content by Jarmo72

Thanks for your hint "jas0162", This is reply from Mikes: The three step rods aren't available anywhere that we know of, I don't have spec sizes for the 16-403 rod. Edelbrock rods/jets and Carter AFB rods/jets are often interchangeable. We always recommend using the original carb as long as...

Hello Guy's, I opened and cleaned my original Carter completely, during this cleaning I install Edelbrock 1403#( 500cfm) on the top of my engine. Thinking that there comes some performance/ fuel economy improvement. I made testing and tuning by changing rod's and jet's, leaner/ richer. Best...

Mattax, thanks for your comments, mine disc and hub is Kelsey Hayes, that is sure now. I describe the problem wrongly. Actually there is knocking with low speed, when I drive faster naturally I can't hear it. The reason is that disc is not in balance any more, there is run out on disc and brake...

Thanks for your help, how about break shoes? I was studing this littel more and for me it looks that those are not bendix style, looks more like Kelsey -hayes style brakes.

Thanks for your help, I will open one side and check those measures. You know, from here in Finland those are difficult to get, I have rebuild almost whole car and I need to use your help, who got parts near by. I just finaliced swap of rear differential, I have now Yokon mounted. Waiting for...

Hello , can anyone inform where to get new front disc's for my Barracuda. My Barracuda came out from factory with front disc's installed. Disc outer diameter ruffly 11" with small (5x4,0") bolt pattern. There start to be some vibration and I don't know where to get new ones? If I am right...

Now I got ansewer.

I took out that cam about year ago, couldn't find any marks on that. It performed fine, but it was worn out, I decided to go reconditioning route. Now I have that Cam on my garages table and Comp Cam mounted. Workshop, who maid repair, informed that it has .406 lift both I and E. Duration is...

Hello, can someone give me an idea of paint marks. Is there some duration and valve lift information behind those colours?

I would like to see yours.

Most probably it is Rallye performance indicator, nothing else.

By the way, do you have any idea how rare is my Barracuda. I have feeling that it is quite rare car what I have, (VIN, BH23E72....)

Thanks for Your Help!

Hello there. Can someone decode my Barracuda's Fender Tag. I have had some problems to identify all marked options.

I took out cam shaft out of my 273, 4 bbl and it looks that both intake and exhaust is about .406 lift and both int and exh is about 201 durations ( mechanical lifters). Can anyone identify this CAM? I am running now with comp 20-221-3( with hydraulic lifters). Wondering is it worth of money to...