Search results for query: *

Thanks for your hint "jas0162", This is reply from Mikes: The three step rods aren't available anywhere that we know of, I don't have spec sizes for the 16-403 rod. Edelbrock rods/jets and Carter AFB rods/jets are often interchangeable. We always recommend using the original carb as long as...

Hello Guy's, I opened and cleaned my original Carter completely, during this cleaning I install Edelbrock 1403#( 500cfm) on the top of my engine. Thinking that there comes some performance/ fuel economy improvement. I made testing and tuning by changing rod's and jet's, leaner/ richer. Best...

Mattax, thanks for your comments, mine disc and hub is Kelsey Hayes, that is sure now. I describe the problem wrongly. Actually there is knocking with low speed, when I drive faster naturally I can't hear it. The reason is that disc is not in balance any more, there is run out on disc and brake...

Thanks for your help, how about break shoes? I was studing this littel more and for me it looks that those are not bendix style, looks more like Kelsey -hayes style brakes.

Thanks for your help, I will open one side and check those measures. You know, from here in Finland those are difficult to get, I have rebuild almost whole car and I need to use your help, who got parts near by. I just finaliced swap of rear differential, I have now Yokon mounted. Waiting for...

Hello , can anyone inform where to get new front disc's for my Barracuda. My Barracuda came out from factory with front disc's installed. Disc outer diameter ruffly 11" with small (5x4,0") bolt pattern. There start to be some vibration and I don't know where to get new ones? If I am right...

Now I got ansewer.

I took out that cam about year ago, couldn't find any marks on that. It performed fine, but it was worn out, I decided to go reconditioning route. Now I have that Cam on my garages table and Comp Cam mounted. Workshop, who maid repair, informed that it has .406 lift both I and E. Duration is...

Hello, can someone give me an idea of paint marks. Is there some duration and valve lift information behind those colours?

I would like to see yours.

Most probably it is Rallye performance indicator, nothing else.

By the way, do you have any idea how rare is my Barracuda. I have feeling that it is quite rare car what I have, (VIN, BH23E72....)

Thanks for Your Help!

Hello there. Can someone decode my Barracuda's Fender Tag. I have had some problems to identify all marked options.

I took out cam shaft out of my 273, 4 bbl and it looks that both intake and exhaust is about .406 lift and both int and exh is about 201 durations ( mechanical lifters). Can anyone identify this CAM? I am running now with comp 20-221-3( with hydraulic lifters). Wondering is it worth of money to...

Thanks, that I was thinking.

I have been collecting some casting numbers on my engine during the rebuild and I noticed one difference. Like I have earlier writed that I have original E code Barracuda 1967 Notchback ( 273, 4bbl, 4 speed). On intake there is number 2536563 and if I look My Mopar com Intake casting numbers...

For my carb, I have about 1/2" thick 4 bore spacer in use. And it works! Head gasket is thing what is bothering me. Perhaps I will pick correct ones and change those, who knows. Anyway I am happy what I got out and it's nice to notice that you have been waiting those Dyno results. What comes...

I am using Mopar perf. orange ignition unit and vacuum advanced elect. distributor.

I was sure that, there is numbers of 273 lovers, like me. That's why I post my results. Some added infos of my build. I try to keep my Barracuda as original as possible, only updates at the engine is Cam with hyd. lifters, headers and elect. ignition, new timing set and new oil pump. All the...

Sorry, I missed intake manifold. Naturally it is also original, cast iron, heavy piece of history. During the past they said that your garage build has been succeed if you don't loose more than 10% compared stock power/torque.

Original 273, 4 bbl with std bore, original pistons, .010 over size fitted rings. Comp Cam 20-221-3 with hydraulic lifters, std heads, Flow tech headers and original Carter 4294 S carb. 242Hp /5300rpm, 263lb-ft /4000rpm

Completed with com 7821-16 rods, seems to be correct length. And ready for Dyno test/tuning.

Hello, I just finished my engine rebuild and It's ready for power/torque measuring. I took out Camshaft and find out some numbering on the shaft * L 17*. I am wondering will it be original or some aftermarket camshaft? Engine is 273, 4bbl, build late 1966, cause Barracuda has been shipped to...

I am searching rallye tachometer for my 1967 Barracuda.

Thanks for your comment. This 400cfm Carter is pretty close what I might need. I guess it is original, like all the others has been...I am happy Barracuda owner. Carter is working fine after cleaning , adjustment, seal, acc pump, spring change etc. I will not install Edelbrock I'm gonna sell it.

Hello there, I am rebuilding my 273 4 bbl engine and wondering which one are better for my needs. Of cource I can make test trial , but I know, You have more experience there. I have Carter 4294S, light rebuild done during last winter. I have also new eddy 500cfm on my garage. Standard size...

Thanks for your advice! I really don't wanna run out my matching engine.

That is correct, Order from USA, shipping + tax+ custom clearance, price is normally about 3 times , compared what You get there. Anyway I am happy with my hoppy and I get enough info, so I will order pushrods. By the way, my driving season is over now, today we got first snow here...

Thanks all of YOU, We have here ( In FINLAND) mid night now so I will take a nap, but once I open my eyes I am back. This is not so clear for me.... But I know what I need. You are very helpfull there!!!!! Thanks a lot.