Recent content by Jeremiah David

So I got in the adapter for the edlebrock carb. The throttle cable is to long. Having trouble finding what one I need to get. Can somebody help point me in the right direction? 73 duster came with a slant 6 Now has a 360 in it

Here is the carb I took off.

I'll post pictures of the Holley when I get up. I work nights and just got home from work.

Thank you

The carb I pulled off was a Holley 750cfm 4 barrel. I wanted something smaller that would work with engine better. I'm looking at ordering a new throttle cable somebody posted up in here as well.

So I have a lot to learn still. I was matching up how the guy I got it from had the Holley hooked up. What am I doing wrong and what do I need to fix? Sorry if it's to many questions, but I want to make sure I do it right. This is the first time I've swapped a carb.

Sorry I work nights and got off at 6 am this morning. Yes the original was the 318 in the car.

It's only there until I can get a fuel rail.

I had put it in the clamp and pulled slack, but it was still giving me issues. I'll look into the linkage though.

I am pretty sure it's the stock cable. It was hooked up to my old carb, but they had the excess cable by the firewall. When I try to do what was done before it keeps bending the cable. I have a connection to run the cable through if I cut it, but just not sure I want to do that.

I disconnected it for now, but I have the clips and all that were used on the old carb. I have it laying there to show how much further the cable goes past the linkage.

I'm having trouble getting the throttle cable hooked up to my new carb. Problem is throttle cable is to long. When the cable should be going back, as of you let off the gas, the cable bends up and doesn't go all the way back in. My question is should I cut the cable and use a new clamp to...

The bed measures 7'5"L X 6'5"W.

1942 GMC 1 ton truck, dually, rear axle cut down. It has original cab, 454 big block, Holley street avenger 650cfm carb, for 9 rear end, dual transmission coolers, aluminum radiator. Power steering and power brakes. Does not overheat. Runs good, clear title. Bed measures 7'5"L X 6'5"W Asking...

Thought I recognized the model.