Thanks to everyone who sent suggestions. I did have the shoes in backwards as well. They came in the vehicle like that when purchased. I’ve been reading past posts from members regarding this issue. I still have a little play in the piston so I ordered a PS gear from firm feel. Thanks again to...
I have been watching You-Tube videos from Chrysler Master Tech power steering adjustments from 1970. It shows how to adjust the sector shaft but is does not say if this needs to be done with the engine idling or off. I will start the engine and check this play again. I have rebuilt the...
I actually watched the steering shaft while moving the steering wheel. The shaft will move before the piston even tries to move the sector shaft. It’s the back and forth play in the steering shaft that I’m trying to resolve. Pitman arm and all components in the steering linkage are in good shape.
I have a 65 Barracuda. I had the power steering box rebuilt last year. I have a lot of play in the steering wheel. I have adjusted the sector shaft. Is there anything else to adjust to get this play out of the steering wheel?
The heads are at a machine shop at this time. He said that the cracks were in both heads by the water jacket. The thing is that I didn't have any coolant in the oil when I drained it and it didn't seem to be coming out of the exhaust when I ran it before tear down. I will call him tomorrow and...
I tried to send a response but I'm new to this so if you get something twice, forgive.
I live about 280 mile south of Ann Arbor. A friend found a set of head off of a '69 273. According to others on this site I would need to get the intake for these. So saying that it might be better if you...
I bought a 1965 Barracuda Formula S. I found out that both heads have cracks. I was told that these can be pinned. The cracks are near the water jacket and not around the compression area.
Has anyone repaired these heads and had success, I'm concerned?
I was told that 318 ci and 340 ci heads...