Recent content by John Collins

They’re back in stock at Rock Auto and Amazon has 3 left in stock. Rock Auto is about $153 shipped and Amazon is about $136 shipped.

He’s learned how to get up on his own, utilizing the cylindrical scratch post to get to the stairs.

It’s definitely not over engineered… I most likely will cut down the top step 2” and replace the 8” brackets with the 10” version for the top 2 stairs. It works fine, but the middle bracket has a slight lean downward and it bugs me and can’t be corrected without a horizontal support, which...

He likes it.

He’s got me… I’m already adding a catwalk to my living room. Should be installed by Wednesday. I need to put a clear coat on the planks I painted and the brackets arrive tomorrow.

Just adopted this little guy. My first cat… He’s pretty rad. My daughters stoked and apparently I’m a cat guy now. Lol

I get it as well and also a California resident.

I’m looking for an inexpensive option to replace my brake booster. This is the best option that I’ve seen, as far as price and quality of product(based on reviews). Does anyone out there know of a site that has them in stock? Or, is there another option out there in the same price range?

I tried to email you, but your inbox is full… Is that the right picture of the listing? It states for B and E bodies. I’ve seen that same listing while shopping for they’re A body torsion bars and the ones in the picture above are measured at 41”.

Nothings precious here. I don’t give a **** about the part. It bugs me though that he did a piss poor job as a seller and then posts this apology instead of actually communicating with me directly. I’ve read a ton of your posts and have learned from you on FABO Rusty and have bought parts from...

All you had to do was tell me exactly what you posted here and not be flakey. No biggie. As far as paranoia, sure, call me paranoid… I’m not interested in taking risks in todays age. I’ve had nothing but great interactions on this site, but I’m still not giving out the rest of my personal info...

To be honest it wouldn’t have bothered me if you would’ve communicated with me better. In the end, you resorted to childish behavior, instead owning up to the situation… Which is hilarious to me because I just found this post of you publicly asking for forgiveness. Why didn’t you just...

After pressing out the pins on my LCA’s, I decided to go with poly bushings and Greasable pins. I couldn’t figure out how to get the casings left behind out without damaging the LCA’s, or welding. I found one method that used a long jigsaw bit to cut a 3/8” wide section the length of the bushing...

I ordered the k7103 bushings and will be installing them today. Thank you again @72bluNblu andceveryobe else!

Thank you guys. I decided to stick with my current setup and getting close to finishing up the detail work. My ghetto spray station. Lol. Waiting on stock replacement parts from RockAuto now. I’m pretty stoked at how it’s turning out. Everything was degreased, wire brushed, scotch pad, then soap...