Recent content by matty mopar

Accel Dual Point Distributor Mopar Small Block PN# 30301 I believe this will fit any LA 273, 318, 340, & 360 Distributor appears used but turns freely and does not seem to have much wear parts Included in sale are all needed to make the distributor work like new, and are all Accel Parts: New...

Anyone interested? Make an offer!

Attached are some pics!

For sale is a A230 three speed manual transmission. It has the side mount with three, threaded holes for a floor mounted shifter. Also have a three speed shifter with it. On the case is the stamping: C99224-3. $500 obo Please PM me for more info.

Does anyone have specific tips on how to remove the torsion bars and move them to another adjustment slot safely?

The car is a 1963 There wasn't the insulation up originally. It had a type of thin brown stuff. Not sure how to explain it, it wasn't part of the headliner but it was on the roof.

I used contact cement. The process I did was paint the roof, paint the insulation, let is sit for a few minutes, then attach them. This held. When I went to put the headliner back up, I put the contact cement on the insulation, but not on the headliner. A day later, the headliner fell, but the...

Has anyone been having trouble with off the shelf voltage regulators lately? The old mechanical type, not the solid state ones. I've gone through 3 in the past two years on two separate cars. Both have factory stock wiring. Everything works fine for a while, but they ultimately go. Is it just...

It is the suspended type.

I would double check your timing. Also, I heard that once the car breaks 200 degrees, to shut it off and let it cool down. You don't want all that heat during break in time. The 20 minutes doesn't have to be continuous, so even though you stopped after 7 you're still fine.

My headliner fell in the rear, towards the rear window. The factory insulation came apart. So I removed all of it, and put a carpet insulation that I had up there, and glued that to the roof, and glued the headliner to it. I used the spray on glue that's intended to interior parts. It...

Does the GL5 definitely dissolve the brass syncros?

Happy thanksgiving everyone!

Still nothing yet.

Nothing has really fit what I am looking for.